EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tooth Shape Controls Stiffness and Food Collection Efficiency in Biomimetic Radular Teeth

Wencke Krings iD, Tamina Riesel, Thomas M Kaiser, Alexander Daasch, Ellen Schulz-Kornas iD, Stanislav N Gorb iD

Biomimetics · 03.04.2026 · 11 (4) · 246

DOI: 10.3390/biomimetics11040246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 03.04.2026. Verfasst von Wencke Krings und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cariology, Endodontology and Periodontology, Leipzig University, Liebigstraße 12, 04103 Leipzig, Germany. Die Arbeit nennt 105 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Understanding how geometry governs interfacial contact and material removal is central to designing efficient bioinspired surface systems. Gastropod radular teeth form natural arrays of microscale cutting elements optimized for repeated interaction with compliant and semi-rigid substrates, yet experimentally validated shape–performance relationships remain limited. Here, we isolate geometric effects on interfacial mechanics using stereolithography-printed biomimetic tooth arrays inspired by the taenioglossan radula of the hard-substrate grazer Spekia zonata. Two morphologically distinct tooth types (central and marginal) were systematically varied in cusp and stylus geometry (four variants each), while array configuration, material, and boundary conditions were kept constant. Tooth stiffness was quantified in bending tests as load-induced height reduction. Interfacial performance was assessed using a controlled pull-through assay in agarose substrates of two stiffness levels (0.4% and 0.8%), with continuous force recording and measurement of removed mass. Marginal-tooth geometries were stiffer and consistently removed more substrate than central variants. Although work increased substantially in stiffer gels, removal did not scale proportionally and declined for central teeth, revealing a decoupling between mechanical input and yield. Performance correlated with active engagement rather than work alone, indicating geometry-limited contact regimes. These findings establish geometry-controlled stiffness and engagement as key parameters for efficient abrasive interfaces.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingfunctional morphologygastropodaoptimal foragingstereolithography

Autor:innen und Institutionen

  • Department of Cariology, Endodontology and Periodontology, Leipzig University, Liebigstraße 12, 04103 Leipzig, Germany.
  • Section Mammalogy and Palaeoanthropology, Leibniz Institute for the Analysis of Biodiversity Change, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany.
  • Department of Electron Microscopy, Institute of Cell and Systems Biology of Animals, University of Hamburg, Martin-Luther-King-Platz 3, 20146 Hamburg, Germany.
  • Department of Functional Morphology and Biomechanics, Zoological Institute, Kiel University, Am Botanischen Garten 1-9, 24118 Kiel, Germany.

ORCID-Profile: Wencke Krings, Ellen Schulz-Kornas, Stanislav N Gorb

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Krings, W., Riesel, T., Kaiser, T. M., Daasch, A., Schulz-Kornas, E., & Gorb, S. N. (2026). Tooth Shape Controls Stiffness and Food Collection Efficiency in Biomimetic Radular Teeth. Biomimetics, 11(4), 246. https://doi.org/10.3390/biomimetics11040246

Vancouver

Krings W, Riesel T, Kaiser TM, Daasch A, Schulz-Kornas E, Gorb SN. Tooth Shape Controls Stiffness and Food Collection Efficiency in Biomimetic Radular Teeth. Biomimetics. 2026;11(4):246. doi:10.3390/biomimetics11040246

BibTeX
@article{Krings2026,
  author = {Krings, Wencke and Riesel, Tamina and Kaiser, Thomas M and Daasch, Alexander and Schulz-Kornas, Ellen and Gorb, Stanislav N},
  title = {Tooth Shape Controls Stiffness and Food Collection Efficiency in Biomimetic Radular Teeth},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {246},
  doi = {10.3390/biomimetics11040246}
}
Kostenlos starten →