Fabrication and Drag Reduction Performance of Bionic Surfaces Featuring Staggered Shield Scale Structures
Biomimetics · 14.03.2026 · 11 (3) · 209
DOI: 10.3390/biomimetics11030209 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 14.03.2026. Verfasst von Xin Gu und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Autonomous Marine Vehicle Technology, Harbin Engineering University, Harbin 150001, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yifeng Fu, Pan Cao, National Key Laboratory of Autonomous Marine Vehicle Technology, Harbin Engineering University.
Abstract (Originalsprache)
To investigate the drag reduction mechanism of shark skin placoid scales and develop high-efficiency drag-reducing surfaces, this study designed and fabricated a biomimetic shark skin surface featuring staggered microscale groove structures. The fabrication process involved laser etching on silicon wafers to create a placoid microstructure template, followed by polydimethylsiloxane (PDMS) replication to obtain biomimetic shark skin samples. Sedimentation experiments demonstrated that the biomimetic surface significantly reduced settling time compared to a smooth surface, achieving a drag reduction rate of 5.65%. Further computational fluid dynamics (CFD) simulations were conducted to analyze the near-wall flow characteristics around the biomimetic surface. The results revealed that the drag reduction mechanism primarily stems from the effective regulation of near-wall laminar flow by the micro-groove structures: a low-velocity fluid layer formed within the grooves reduces the near-wall velocity gradient, thereby decreasing frictional drag, while stable recirculation zones develop within the grooves, contributing to momentum redistribution and reduced energy dissipation. Additionally, the staggered arrangement of the grooves promotes a smoother pressure distribution along the flow direction, mitigating pressure drag by reducing the pressure differential between windward and leeward surfaces. The experimental and simulation results showed excellent agreement (simulated drag reduction rate: 5.08%), collectively verifying the feasibility and effectiveness of the proposed biomimetic placoid structure in achieving fluid drag reduction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Key Laboratory of Autonomous Marine Vehicle Technology, Harbin Engineering University, Harbin 150001, China.
- School of Mechanical Engineering, Yangzhou University, Yangzhou 225127, China.
- State Key Laboratory of Maritime Technology and Safety, Wuhan University of Technology, Wuhan 430063, China.
- School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China.
ORCID-Profile: Yifeng Fu
Förderung
- Yifeng Fu
- Pan Cao
- National Key Laboratory of Autonomous Marine Vehicle Technology, Harbin Engineering University
- National Natural Science Foundation of China
Zitieren
APA
Gu, X., Cao, P., Bai, X., & Fu, Y. (2026). Fabrication and Drag Reduction Performance of Bionic Surfaces Featuring Staggered Shield Scale Structures. Biomimetics, 11(3), 209. https://doi.org/10.3390/biomimetics11030209
Vancouver
Gu X, Cao P, Bai X, Fu Y. Fabrication and Drag Reduction Performance of Bionic Surfaces Featuring Staggered Shield Scale Structures. Biomimetics. 2026;11(3):209. doi:10.3390/biomimetics11030209
BibTeX
@article{Gu2026,
author = {Gu, Xin and Cao, Pan and Bai, Xiuqin and Fu, Yifeng},
title = {Fabrication and Drag Reduction Performance of Bionic Surfaces Featuring Staggered Shield Scale Structures},
journal = {Biomimetics},
year = {2026},
volume = {11},
number = {3},
pages = {209},
doi = {10.3390/biomimetics11030209}
}
EUVIMED