EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Effects of Biomimetic Structures on Heat Transfer Enhancement and Flow Resistance Reduction

Kaichen Wang, Yan Shi, Junjie Chen, Yuchi Dai

Biomimetics · 09.03.2026 · 11 (3) · 198

DOI: 10.3390/biomimetics11030198 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 09.03.2026. Verfasst von Kaichen Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun 130022, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China International Science and Technology Cooperation, International Science and Technology Cooperation Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study numerically investigated the thermal performance of a rectangular channel incorporating scale-inspired biomimetic protrusion structures with micro-grooves on their surfaces. A three-dimensional numerical model was established and validated against experimental data under identical geometric parameters and boundary conditions, demonstrating good agreement in terms of outlet temperature and pressure drop over a wide range of Reynolds numbers. The effects of groove depth on friction factor, Colburn factor, and overall performance evaluation criterion (PEC) were systematically analyzed to elucidate the underlying flow and heat transfer mechanisms. The results indicated that the introduction of biomimetic grooves significantly modified the flow structure and thermal boundary layer development, thereby enhancing fluid mixing and heat transfer. However, excessive groove depth intensified flow separation and pressure loss, leading to performance deterioration. An optimal groove depth of 0.6 mm (approximately 40% of the fin height) was identified, which achieved the best balance between heat transfer enhancement and flow resistance. The findings provide theoretical guidance for the biomimetic surface design of high-efficiency heat exchangers.

Schlagwörter

Stichwörter der Autor:innen

biomimetic groove structureheat transfer enhancementperformance evaluation criterion

Autor:innen und Institutionen

  • School of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun 130022, China.
  • National Base of International Science and Technology Cooperation for Optics, Changchun 130022, China.

Förderung

  • China International Science and Technology Cooperation
  • International Science and Technology Cooperation Project

Zitieren

APA

Wang, K., Shi, Y., Chen, J., & Dai, Y. (2026). Synergistic Effects of Biomimetic Structures on Heat Transfer Enhancement and Flow Resistance Reduction. Biomimetics, 11(3), 198. https://doi.org/10.3390/biomimetics11030198

Vancouver

Wang K, Shi Y, Chen J, Dai Y. Synergistic Effects of Biomimetic Structures on Heat Transfer Enhancement and Flow Resistance Reduction. Biomimetics. 2026;11(3):198. doi:10.3390/biomimetics11030198

BibTeX
@article{Wang2026,
  author = {Wang, Kaichen and Shi, Yan and Chen, Junjie and Dai, Yuchi},
  title = {Synergistic Effects of Biomimetic Structures on Heat Transfer Enhancement and Flow Resistance Reduction},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {3},
  pages = {198},
  doi = {10.3390/biomimetics11030198}
}
Kostenlos starten →