EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Fracture Mechanism of Impact-Resistant Bionic 3D Model Structures Inspired by Composite Structure of Mantis Shrimp Appendage

Xiao Yang, Miaoyu Meng, Xingyu Meng, Aolong Huang, Chun Shao iD, Yonghua Wang, Hao Jin iD

Biomimetics · 01.03.2026 · 11 (3) · 162

DOI: 10.3390/biomimetics11030162 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 01.03.2026. Verfasst von Xiao Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nature Science Foundation of China, Fundamental Research Funds for the Provincial Universities of Zhejiang, Key Laboratory for Cross-Scale Micro and Nano Manufacturing.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the impact resistance of composite materials, this study adopted the structures in the impact region of mantis shrimp appendages as a bionic prototype, designing a composite structure with a rigid outer layer and flexible sinusoidal inner layer. Meanwhile, bionic arrangement was conducted on the fibers in three directions (X-Y, X-Z, and Y-Z planes) within the flexible layer to regulate the crack propagation path during the impact process. Finite Element Method and low-velocity impact tests were carried out to verify the structural effectiveness, analyze the energy absorption mechanism, and investigate the failure modes. Relative to the basic rigid-flexible structure, the brick-and-mortar (Y-Z) and vertical-horizontal alternating fiber (X-Y) models show a 94% and 109% improvement in kinetic energy absorption efficiency, respectively. Additionally, the catastrophic damage in the impact center area caused by crack concentration is significantly reduced. This study confirms that the bionic 3D arrangement of fibers can realize interlayer connection, optimize crack distribution, and enhance energy dissipation, thereby improving the impact resistance of composite materials.

Schlagwörter

Stichwörter der Autor:innen

bionic structurefiber compositesimpact resistancemulti-directional

Autor:innen und Institutionen

  • School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China.
  • College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China.

ORCID-Profile: Chun Shao, Hao Jin

Förderung

  • National Nature Science Foundation of China
  • Fundamental Research Funds for the Provincial Universities of Zhejiang
  • Key Laboratory for Cross-Scale Micro and Nano Manufacturing
  • Jiangxi Key Laboratory for Innovative Configuration Aircraft Design
  • Open Project Program of Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Ministry of Education, Changchun University of Science and Technology

Zitieren

APA

Yang, X., Meng, M., Meng, X., Huang, A., Shao, C., Wang, Y., & Jin, H. (2026). The Fracture Mechanism of Impact-Resistant Bionic 3D Model Structures Inspired by Composite Structure of Mantis Shrimp Appendage. Biomimetics, 11(3), 162. https://doi.org/10.3390/biomimetics11030162

Vancouver

Yang X, Meng M, Meng X, Huang A, Shao C, Wang Y, et al. The Fracture Mechanism of Impact-Resistant Bionic 3D Model Structures Inspired by Composite Structure of Mantis Shrimp Appendage. Biomimetics. 2026;11(3):162. doi:10.3390/biomimetics11030162

BibTeX
@article{Yang2026,
  author = {Yang, Xiao and Meng, Miaoyu and Meng, Xingyu and Huang, Aolong and Shao, Chun and Wang, Yonghua and Jin, Hao},
  title = {The Fracture Mechanism of Impact-Resistant Bionic 3D Model Structures Inspired by Composite Structure of Mantis Shrimp Appendage},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {3},
  pages = {162},
  doi = {10.3390/biomimetics11030162}
}
Kostenlos starten →