EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bio-Inspired Design of Mechanical Properties of Hybrid Topological Cellular Honeycomb Structures

Yingqiu Sun, Fan Guo, Yangyang Liu

Biomimetics · 12.08.2025 · 10 (8) · 528

DOI: 10.3390/biomimetics10080528 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 12.08.2025. Verfasst von Yingqiu Sun und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering, Chuzhou Polytechnic, Chuzhou 239000, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Science Research Project of Anhui Provincial Universities, Science Research Project of Anhui Provincial Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inspired by the evolutionary optimization of biological load-bearing systems, honeycomb structures are highly valued in applications involving impact protection and lightweight load-bearing due to their outstanding mechanical properties. This study introduces an interesting honeycomb structure known as the hybrid topological cellular honeycomb structure (HTCHS), which integrates four distinctive topological cells. To effectively fabricate HTCHS samples, the research utilized a fused deposition modeling (FDM) process, employing polyethylene terephthalate glycol-modified (PETG) as the matrix material, successfully producing the HTCHS samples. A finite element simulation model for the HTCHS is created using LS-DYNA software(LS-DYNA R11.1.0 software), and its accuracy is confirmed through a comparative analysis of experimental and simulation results. The influence of the topological cell parameters (T1 to T4) on compressive energy absorption, specific energy absorption, and peak crushing force through parametric modeling is investigated. The mechanical properties of honeycomb structures vary depending on the cell parameters at different positions, and monotonically increasing the design parameters does not improve the energy absorption capacity of the HTCHS. To enhance the mechanical performance of the HTCHS, the initial periodic cell configurations are transformed into non-periodic designs. A discrete optimization design framework for local parameters of the HTCHS is established, integrating cell coding with the MOPSO algorithm. The feasibility of the optimization results is validated through experimental data, demonstrating that this study offers an effective technical solution for developing a novel generation of cellular honeycomb structures with customizable mechanical properties.

Schlagwörter

Stichwörter der Autor:innen

3D printingbionics designenergy absorptionhoneycomb structuresmechanical property

Autor:innen und Institutionen

  • School of Electrical Engineering, Chuzhou Polytechnic, Chuzhou 239000, China.
  • School of Engineering, Anhui Agricultural University, Hefei 230036, China.
  • School of Mechanical Engineering, Anhui University of Technology, Ma'anshan 243032, China.

Förderung

  • The Science Research Project of Anhui Provincial Universities
  • Science Research Project of Anhui Provincial Universities

Zitieren

APA

Sun, Y., Guo, F., & Liu, Y. (2025). Bio-Inspired Design of Mechanical Properties of Hybrid Topological Cellular Honeycomb Structures. Biomimetics, 10(8), 528. https://doi.org/10.3390/biomimetics10080528

Vancouver

Sun Y, Guo F, Liu Y. Bio-Inspired Design of Mechanical Properties of Hybrid Topological Cellular Honeycomb Structures. Biomimetics. 2025;10(8):528. doi:10.3390/biomimetics10080528

BibTeX
@article{Sun2025,
  author = {Sun, Yingqiu and Guo, Fan and Liu, Yangyang},
  title = {Bio-Inspired Design of Mechanical Properties of Hybrid Topological Cellular Honeycomb Structures},
  journal = {Biomimetics},
  year = {2025},
  volume = {10},
  number = {8},
  pages = {528},
  doi = {10.3390/biomimetics10080528}
}
Kostenlos starten →