EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Machine Learning Optimization of Cylindrical TPMS Lattices for Bone Implants

Mansoureh Rezapourian iD, Ali Cheloee Darabi iD, Mohammadreza Khoshbin iD, Irina Hussainova iD

Biomimetics · 18.07.2025 · 10 (7) · 475

DOI: 10.3390/biomimetics10070475 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 18.07.2025. Verfasst von Mansoureh Rezapourian und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, Tallinn University of Technology, 19086 Tallinn, Estonia. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Estonian Research Council, Estonian Research Council, Estonia, M-ERA.Net project “BiLaTex”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a multi-objective optimization framework for designing cylindrical triply periodic minimal surface (TPMS) lattices tailored for bone implant applications. Using an artificial neural network (ANN) as a surrogate model trained on simulated data, four key properties—ultimate stress (U), energy absorption (EA), surface area-to-volume ratio (SA/VR), and relative density (RD)—were predicted from seven lattice design parameters. To address anatomical variability, a novel implant size-based categorization (small, medium, and large) was introduced, and separate optimization runs were conducted for each group. The optimization was performed via the NSGA-II algorithm to maximize mechanical performance (U and EA) and surface efficiency (SA/VR), while filtering for biologically relevant RD values (20–40%). Separate optimization runs were conducted for small, medium, and large implant size groups. A total of 105 Pareto-optimal designs were identified, with 75 designs retained after RD filtering. SHapley Additive exPlanations (SHAP) analysis revealed the dominant influence of thickness and unit cell size on target properties. Kernel density and boxplot comparisons confirmed distinct performance trends across size groups. The framework effectively balances competing design goals and enables the selection of size-specific lattices. The proposed approach provides a reproducible pathway for optimizing bioarchitectures, with the potential to accelerate the development of lattice-based implants in personalized medicine.

Schlagwörter

Stichwörter der Autor:innen

Johnson–Cook failure modelPareto front analysisartificial neural network (ANN)bone implantsfinite element analysis (FEA)machine learningmechanical property predictionmulti-objective optimizationsize-specific implant designtriply periodic minimal surfaces (TPMS)

Autor:innen und Institutionen

  • Department of Mechanical and Industrial Engineering, Tallinn University of Technology, 19086 Tallinn, Estonia.
  • Institut für Materialprüfung, Werkstoffkunde und Festigkeitslehre, Universität Stuttgart, Pfaffenwaldring 32, 70569 Stuttgart, Germany.
  • Department of Mechanical Engineering, Shahid Rajaee Teacher Training University, Lavizan, Tehran 1678815811, Iran.

ORCID-Profile: Mansoureh Rezapourian, Ali Cheloee Darabi, Mohammadreza Khoshbin, Irina Hussainova

Förderung

  • Estonian Research Council
  • Estonian Research Council, Estonia
  • M-ERA.Net project “BiLaTex”

Zitieren

APA

Rezapourian, M., Cheloee Darabi, A., Khoshbin, M., & Hussainova, I. (2025). Multi-Objective Machine Learning Optimization of Cylindrical TPMS Lattices for Bone Implants. Biomimetics, 10(7), 475. https://doi.org/10.3390/biomimetics10070475

Vancouver

Rezapourian M, Cheloee Darabi A, Khoshbin M, Hussainova I. Multi-Objective Machine Learning Optimization of Cylindrical TPMS Lattices for Bone Implants. Biomimetics. 2025;10(7):475. doi:10.3390/biomimetics10070475

BibTeX
@article{Rezapourian2025,
  author = {Rezapourian, Mansoureh and Cheloee Darabi, Ali and Khoshbin, Mohammadreza and Hussainova, Irina},
  title = {Multi-Objective Machine Learning Optimization of Cylindrical TPMS Lattices for Bone Implants},
  journal = {Biomimetics},
  year = {2025},
  volume = {10},
  number = {7},
  pages = {475},
  doi = {10.3390/biomimetics10070475}
}
Kostenlos starten →