EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Droplet Spreading and Rebound Dynamics on Superhydrophobic Surfaces Using Machine Learning

Samo Jereb iD, Jure Berce iD, Robert Lovšin, Matevž Zupančič iD, Matic Može iD, Iztok Golobič iD

Biomimetics · 01.06.2025 · 10 (6) · 357

DOI: 10.3390/biomimetics10060357 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 01.06.2025. Verfasst von Samo Jereb und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva cesta 6, SI-1000 Ljubljana, Slovenia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research and Innovation Agency, University of Ljubljana, CELSA project “Droplet impact dynamics and icing characteristics on rationally microengineered superhydrophobic surfaces”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The spreading and rebound of impacting droplets on superhydrophobic interfaces is a complex phenomenon governed by the interconnected contributions of surface, fluid and environmental factors. In this work, we employed a collection of 1498 water–glycerin droplet impact experiments on monolayer-functionalized laser-structured aluminum samples to train, validate and optimize a machine learning regression model. To elucidate the role of each influential parameter, we analyzed the model-predicted individual parameter contributions on key descriptors of the phenomenon, such as contact time, maximum spreading coefficient and rebound efficiency. Our results confirm the dominant contribution of droplet impact velocity while highlighting that the droplet spreading phase appears to be independent of surface microtopography, i.e., the depth and width of laser-made features. Interestingly, once the rebound transitions to the retraction stage, the importance of the unwetted area fraction is heightened, manifesting in higher rebound efficiency on samples with smaller distances between laser-fabricated microchannels. Finally, we exploited the trained models to develop empirical correlations for predicting the maximum spreading coefficient and rebound efficiency, both of which strongly outperform the currently published models. This work can aid future studies that aim to bridge the gap between the observed macroscale surface-droplet interactions and the microscale properties of the interface or the thermophysical properties of the fluid.

Schlagwörter

Stichwörter der Autor:innen

droplet impactdroplet reboundlaser-textured surfacemachine learningmaximum spreading coefficientrebound efficiencysuperhydrophobic surface

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva cesta 6, SI-1000 Ljubljana, Slovenia.

ORCID-Profile: Samo Jereb, Jure Berce, Matevž Zupančič, Matic Može, Iztok Golobič

Förderung

  • Slovenian Research and Innovation Agency
  • University of Ljubljana
  • CELSA project “Droplet impact dynamics and icing characteristics on rationally microengineered superhydrophobic surfaces”

Zitieren

APA

Jereb, S., Berce, J., Lovšin, R., Zupančič, M., Može, M., & Golobič, I. (2025). Investigation of Droplet Spreading and Rebound Dynamics on Superhydrophobic Surfaces Using Machine Learning. Biomimetics, 10(6), 357. https://doi.org/10.3390/biomimetics10060357

Vancouver

Jereb S, Berce J, Lovšin R, Zupančič M, Može M, Golobič I. Investigation of Droplet Spreading and Rebound Dynamics on Superhydrophobic Surfaces Using Machine Learning. Biomimetics. 2025;10(6):357. doi:10.3390/biomimetics10060357

BibTeX
@article{Jereb2025,
  author = {Jereb, Samo and Berce, Jure and Lovšin, Robert and Zupančič, Matevž and Može, Matic and Golobič, Iztok},
  title = {Investigation of Droplet Spreading and Rebound Dynamics on Superhydrophobic Surfaces Using Machine Learning},
  journal = {Biomimetics},
  year = {2025},
  volume = {10},
  number = {6},
  pages = {357},
  doi = {10.3390/biomimetics10060357}
}
Kostenlos starten →