EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Validation of a Biomimetic Leg-Claw Mechanism Capable of Perching and Grasping for Multirotor Drones

Yan Zhao iD, Ruzhi Xiang, Hui Li, Chang Wang, Jianhua Zhang, Xuan Liu, Yufei Hao

Biomimetics · 27.12.2024 · 10 (1) · 10

DOI: 10.3390/biomimetics10010010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 27.12.2024. Verfasst von Yan Zhao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hebei Province, Beijing Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multirotor drones are widely used in fields such as environmental monitoring, agricultural inspection, and package delivery, but they still face numerous challenges in durability and aerial operation capabilities. To address these issues, this paper presents a biomimetic leg-claw mechanism (LCM) inspired by the biomechanics of birds. The claw of the LCM adopts a bistable gripper design that can rapidly close through external impact or actively close via the coordination of internal mechanisms. Additionally, its foldable, parallelogram-shaped legs bend under external forces, stretching the main tendon. A ratchet and pawl mechanism at the knee joint locks the leg in the bent position, thereby enhancing the gripping force of the claw. This paper calculates and experimentally verifies the degrees of freedom in different states, the forces required to open and close the gripper, the application scenarios of active and passive grasping, and the maximum load capacity of the mechanism. Furthermore, perching experiments demonstrate that the LCM enables the drone to perch stably on objects of varying diameters.

Schlagwörter

Stichwörter der Autor:innen

aerial manipulatorbiomimetic leg-claw mechanismgripping force analysispassive-active graspingperching with tendon

Autor:innen und Institutionen

  • School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China.
  • School of Mechanical Engineering, Hebei University of Technology, Tianjin 300131, China.

ORCID-Profile: Yan Zhao

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hebei Province
  • Beijing Natural Science Foundation
  • Natural Science Foundation of Hebei Province, China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Zhao, Y., Xiang, R., Li, H., Wang, C., Zhang, J., Liu, X., & Hao, Y. (2024). Design and Validation of a Biomimetic Leg-Claw Mechanism Capable of Perching and Grasping for Multirotor Drones. Biomimetics, 10(1), 10. https://doi.org/10.3390/biomimetics10010010

Vancouver

Zhao Y, Xiang R, Li H, Wang C, Zhang J, Liu X, et al. Design and Validation of a Biomimetic Leg-Claw Mechanism Capable of Perching and Grasping for Multirotor Drones. Biomimetics. 2024;10(1):10. doi:10.3390/biomimetics10010010

BibTeX
@article{Zhao2024,
  author = {Zhao, Yan and Xiang, Ruzhi and Li, Hui and Wang, Chang and Zhang, Jianhua and Liu, Xuan and Hao, Yufei},
  title = {Design and Validation of a Biomimetic Leg-Claw Mechanism Capable of Perching and Grasping for Multirotor Drones},
  journal = {Biomimetics},
  year = {2024},
  volume = {10},
  number = {1},
  pages = {10},
  doi = {10.3390/biomimetics10010010}
}
Kostenlos starten →