EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Poly (l-lactic acid) Scaffolds for Bone Repair with Oriented Hierarchical Microcellular Foam Structure and Biocompatibility

Cenyi Luo iD, Juan Xue, Qingyi Huang, Yuxiang Deng, Zhixin Zhao, Jiafeng Li iD, Xiaoyan Gao, Zhengqiu Li iD

Biomolecules · 25.07.2025 · 15 (8) · 1075

DOI: 10.3390/biom15081075 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomolecules, online erschienen am 25.07.2025. Verfasst von Cenyi Luo und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Material Science and Engineering, Xihua University, Chengdu 610039, China. Hauptthemen laut MEDLINE: Polyesters, Printing, Three-Dimensional, Tissue Scaffolds, Biocompatible Materials. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Sichuan Provincial Natural Science Foundation Youth Fund Program, Tiandi Science & Technology Co Ltd.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a continuous preparation strategy for poly (l-lactic acid) (PLLA) scaffolds with oriented hierarchical microporous structures for bone repair. A PLLA-oriented multi-stage microporous bone repair scaffold (hereafter referred to as the oriented multi-stage microporous scaffold) was designed using a novel extrusion foaming technology that integrates fused deposition modeling (FDM) 3D printing with supercritical carbon dioxide (SC-CO2) microcellular foaming technology. The influence of the 3D-printed structure on the microcellular morphology of the oriented multi-stage microporous scaffold was investigated and optimized. The combination of FDM and SC-CO2 foaming technology enables a continuous extrusion foaming process for preparing oriented multi-stage microporous scaffolds. The mechanical strength of the scaffold reached 15.27 MPa, meeting the requirements for bone repair in a low-load environment. Notably, the formation of open pores on the surface of the oriented multi-stage microporous scaffold positively affected cell proliferation, differentiation, and activity, as well as the expression of anti-inflammatory and pro-inflammatory factors. In vitro cell experiments (such as CCK-8) showed that the cell proliferation rate in the oriented multi-stage microporous scaffold reached 100–300% after many days of cultivation. This work provides a strategy for the design and manufacture of PLLA scaffolds with hierarchical microcellular structures and biocompatibility for bone repair.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersPrinting, Three-DimensionalTissue ScaffoldsBiocompatible MaterialsBone RegenerationPorosityAnimalsCell ProliferationTissue EngineeringCell DifferentiationMiceHumansMaterials Testing

Stichwörter der Autor:innen

biocompatibilitycontinuous extrusion foamingfused deposition modelingoriented hierarchical microporouspoly (l-lactic acid)supercritical carbon dioxide

Substanzen

Polyesterspoly(lactide)Biocompatible Materials

Autor:innen und Institutionen

  • School of Material Science and Engineering, Xihua University, Chengdu 610039, China.
  • CCTEG Coal Mining Research Institute, Beijing 100013, China.
  • Sichuan Institute for Drug Control (Sichuan Testing Center of Medical Devices, Sichuan Musk Deer Research Institute), Chengdu 611731, China.

ORCID-Profile: Cenyi Luo, Jiafeng Li, Zhengqiu Li

Förderung

  • National Natural Science Foundation of China
  • Sichuan Provincial Natural Science Foundation Youth Fund Program
  • Tiandi Science & Technology Co Ltd
  • CCTEG Coal Mining Research Institute
  • General Project of Sichuan Natural Science Foundation
  • Post-doctoral Fund of Zhejiang Province
  • Tiandi Science & Technology Co., Ltd.

Zitieren

APA

Luo, C., Xue, J., Huang, Q., Deng, Y., Zhao, Z., Li, J., Gao, X., & Li, Z. (2025). 3D-Printed Poly (l-lactic acid) Scaffolds for Bone Repair with Oriented Hierarchical Microcellular Foam Structure and Biocompatibility. Biomolecules, 15(8), 1075. https://doi.org/10.3390/biom15081075

Vancouver

Luo C, Xue J, Huang Q, Deng Y, Zhao Z, Li J, et al. 3D-Printed Poly (l-lactic acid) Scaffolds for Bone Repair with Oriented Hierarchical Microcellular Foam Structure and Biocompatibility. Biomolecules. 2025;15(8):1075. doi:10.3390/biom15081075

BibTeX
@article{Luo2025,
  author = {Luo, Cenyi and Xue, Juan and Huang, Qingyi and Deng, Yuxiang and Zhao, Zhixin and Li, Jiafeng and Gao, Xiaoyan and Li, Zhengqiu},
  title = {3D-Printed Poly (l-lactic acid) Scaffolds for Bone Repair with Oriented Hierarchical Microcellular Foam Structure and Biocompatibility},
  journal = {Biomolecules},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {1075},
  doi = {10.3390/biom15081075}
}
Kostenlos starten →