EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Antibacterial Properties of Poly (l-Lactic Acid)-Oriented Microporous Materials

Yihong Li, Yanjun Feng, Qingyi Huang, Cenyi Luo, Wei Chen, Zhengqiu Li iD, Lei Liu, Jiafeng Li iD

Biomolecules · 2024

DOI: 10.3390/biom14111432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomolecules, 2024. Verfasst von Yihong Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Material Science and Engineering, Xihua University, Chengdu 610039, China. Hauptthemen laut MEDLINE: Polyesters, Anti-Bacterial Agents, Dimethylpolysiloxanes, Tensile Strength. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China Youth Fund Project, General Project of Sichuan Natural Science Foundation, Post-doctoral Fund of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this manuscript, an efficient self-reinforcing technology—solid hot drawing (SHD) technology—was combined with green processing supercritical carbon dioxide (SC-CO2) foaming technology to promote poly (l-lactic acid) (PLLA) to form an oriented micropore structure. In addition, Polydimethylsiloxane (PDMS), with a high affinity of CO2 and biological safety, was introduced to enhance the nucleation effect in SC-CO2 foaming and co-regulate the uniformity of oriented micropores’ structure. The results showed that orientation induced PLLA crystallization, so the tensile strength was improved; the maximum tensile strength of the oriented micropores’ PLLA reached 151.2 MPa. Furthermore, the micropores mainly improved the toughness; the maximum elongation at break reached 148.3%. It is worth mentioning that PDMS can form an antibacterial film on the surface of the material, so that the material has a continuous antibacterial effect.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersAnti-Bacterial AgentsDimethylpolysiloxanesTensile StrengthPorosityCarbon DioxideEscherichia coliStaphylococcus aureusMicrobial Sensitivity Tests

Stichwörter der Autor:innen

antibacterial propertiesoriented microporespoly (l-lactic acid)self-reinforcing

Substanzen

poly(lactide)PolyestersAnti-Bacterial AgentsDimethylpolysiloxanesbaysilonCarbon Dioxide

Autor:innen und Institutionen

  • School of Material Science and Engineering, Xihua University, Chengdu 610039, China.
  • CCTEG Coal Mining Research Institute, Beijing 101399, China.
  • State Key Laboratory for Animal Disease Control and Prevention, College of Veterinary Medicine, Lanzhou University, Lanzhou Veterinary Research Institute, Chinese Academy of Agricultural Sciences, Lanzhou 730000, China.

ORCID-Profile: Zhengqiu Li, Jiafeng Li

Förderung

  • National Natural Science Foundation of China Youth Fund Project
  • General Project of Sichuan Natural Science Foundation
  • Post-doctoral Fund of Zhejiang Province
  • Key Research and Development Projects of Liangshan Science and Technology Bureau
  • Technology Transfer Demonstration Project of Sichuan Science and Technology Department
  • Major Science and Technology Project of Gansu Province

Zitieren

APA

Li, Y., Feng, Y., Huang, Q., Luo, C., Chen, W., Li, Z., Liu, L., & Li, J. (2024). Preparation and Antibacterial Properties of Poly (l-Lactic Acid)-Oriented Microporous Materials. Biomolecules. https://doi.org/10.3390/biom14111432

Vancouver

Li Y, Feng Y, Huang Q, Luo C, Chen W, Li Z, et al. Preparation and Antibacterial Properties of Poly (l-Lactic Acid)-Oriented Microporous Materials. Biomolecules. 2024. doi:10.3390/biom14111432

BibTeX
@article{Li2024,
  author = {Li, Yihong and Feng, Yanjun and Huang, Qingyi and Luo, Cenyi and Chen, Wei and Li, Zhengqiu and Liu, Lei and Li, Jiafeng},
  title = {Preparation and Antibacterial Properties of Poly (l-Lactic Acid)-Oriented Microporous Materials},
  journal = {Biomolecules},
  year = {2024},
  doi = {10.3390/biom14111432}
}
Kostenlos starten →