EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Surface Treatments of PEEK for Osseointegration to Bone

Jay R Dondani iD, Janaki Iyer iD, Simon D Tran iD

Biomolecules · 02.03.2023 · 13 (3) · 464

DOI: 10.3390/biom13030464 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Biomolecules, online erschienen am 02.03.2023. Verfasst von Jay R Dondani und 2 weiteren Autor:innen. Beteiligte Einrichtung: McGill Craniofacial Tissue Engineering and Stem Cells Laboratory, Faculty of Dental Medicine and Oral Health Sciences, McGill University, 3640 Univer…. Hauptthemen laut MEDLINE: Osseointegration, Polyethylene Glycols. Die Arbeit wurde bisher 85-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymers, in general, and Poly (Ether-Ether-Ketone) (PEEK) have emerged as potential alternatives to conventional osseous implant biomaterials. Due to its distinct advantages over metallic implants, PEEK has been gaining increasing attention as a prime candidate for orthopaedic and dental implants. However, PEEK has a highly hydrophobic and bioinert surface that attenuates the differentiation and proliferation of osteoblasts and leads to implant failure. Several improvements have been made to the osseointegration potential of PEEK, which can be classified into three main categories: (1) surface functionalization with bioactive agents by physical or chemical means; (2) incorporation of bioactive materials either as surface coatings or as composites; and (3) construction of three-dimensionally porous structures on its surfaces. The physical treatments, such as plasma treatments of various elements, accelerated neutron beams, or conventional techniques like sandblasting and laser or ultraviolet radiation, change the micro-geometry of the implant surface. The chemical treatments change the surface composition of PEEK and should be titrated at the time of exposure. The implant surface can be incorporated with a bioactive material that should be selected following the desired use, loading condition, and antimicrobial load around the implant. For optimal results, a combination of the methods above is utilized to compensate for the limitations of individual methods. This review summarizes these methods and their combinations for optimizing the surface of PEEK for utilization as an implanted biomaterial.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

OsseointegrationPolyethylene GlycolsUltraviolet RaysBiocompatible MaterialsEthersSurface PropertiesBenzophenonesPolymers

Stichwörter der Autor:innen

dental implantimplant biomaterialorthopedic implantosseointegrationpolymersurface treatment

Substanzen

Polyethylene GlycolsBiocompatible MaterialsEtherspolyetheretherketoneBenzophenonesPolymers

Autor:innen und Institutionen

  • McGill Craniofacial Tissue Engineering and Stem Cells Laboratory, Faculty of Dental Medicine and Oral Health Sciences, McGill University, 3640 University Street, Montreal, QC H3A 0C7, Canada.

ORCID-Profile: Jay R Dondani, Janaki Iyer, Simon D Tran

Zitieren

APA

Dondani, J. R., Iyer, J., & Tran, S. D. (2023). Surface Treatments of PEEK for Osseointegration to Bone. Biomolecules, 13(3), 464. https://doi.org/10.3390/biom13030464

Vancouver

Dondani JR, Iyer J, Tran SD. Surface Treatments of PEEK for Osseointegration to Bone. Biomolecules. 2023;13(3):464. doi:10.3390/biom13030464

BibTeX
@article{Dondani2023,
  author = {Dondani, Jay R and Iyer, Janaki and Tran, Simon D},
  title = {Surface Treatments of PEEK for Osseointegration to Bone},
  journal = {Biomolecules},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {464},
  doi = {10.3390/biom13030464}
}
Kostenlos starten →