A Novel Dual-Function Face-Shield Prototype Integrating an On-Demand Hand-Sanitiser Reservoir: Design and Preliminary Benchtop Evaluation
Bioengineering · 06.11.2026 · 13 (11) · 1317
DOI: 10.3390/bioengineering13111317 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 06.11.2026. Verfasst von Pantelie Nicolcescu und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background and Objectives: Rapid hand hygiene is difficult to maintain during uninterrupted patient care. We designed and performed a preliminary benchtop evaluation of a proof-of-concept face-shield prototype integrating an on-demand disinfectant reservoir. Materials and Methods: A dual-function wearable system was built from a PETG visor (230 × 230 mm, 0.20 mm) and modular reservoirs (25, 50, 75, 100 mL). Five complete prototype units were fabricated under the same manufacturing conditions: two separate physical units with 100 mL reservoirs (Units A and B) and one unit each with 75, 50, and 25 mL reservoirs. Functional and mechanical testing was performed across the two 100 mL units, with shared and unit-specific endpoints; chemical compatibility was evaluated using dedicated PETG specimens, while ergonomic assessment was limited to biomechanical modelling. Disinfectant density (Mikrozid AF Liquid) was measured (0.875 ± 0.002 g/mL, n = 5) to convert dispensed mass to volume. The valve delivered 3.08 ± 0.21 mL/activation (CV 6.8%, n = 60; 30/unit, single fill, no refilling).
Results
The system weighed 103.3 g empty and 190.8 g filled with 100.0 mL of disinfectant (87.5 g disinfectant mass). Recalculated cervical torque (τ = m × g × r; baseline: 0.084 N·m) was 0.118 N·m for the empty-reservoir configuration (+40.6%) and 0.252 N·m for the filled configuration (+199.9%). No continuous leakage occurred (mass loss < 0.1 g), retention exceeded 10 N in all directions, and PETG remained stable after 14-day immersion and 50 wiping cycles. Estimated cost was €10–20/unit.
Conclusions
This proof-of-concept supports the technical feasibility of integrating a face-shield platform with immediate access to hand sanitisation in one reusable device, without establishing standards-based protective performance. The small number of separate physical prototypes used for functional testing (two 100 mL units), together with the absence of microbiological, optical-standard and human-factor validation, limits generalisability. Human-participant, microbiological, ergonomic and clinical usability studies are required before clinical implementation. A conceptual touchless valve is proposed for future work.
Zitieren
APA
Nicolcescu, P., Arbune, M., Nechita, A., Matei, M. N., Dinu, C. A., Ciubara, A., Popa, G. V., Stefanescu, A., & Mercuț, M. F. (2026). A Novel Dual-Function Face-Shield Prototype Integrating an On-Demand Hand-Sanitiser Reservoir: Design and Preliminary Benchtop Evaluation. Bioengineering, 13(11), 1317. https://doi.org/10.3390/bioengineering13111317
Vancouver
Nicolcescu P, Arbune M, Nechita A, Matei MN, Dinu CA, Ciubara A, et al. A Novel Dual-Function Face-Shield Prototype Integrating an On-Demand Hand-Sanitiser Reservoir: Design and Preliminary Benchtop Evaluation. Bioengineering. 2026;13(11):1317. doi:10.3390/bioengineering13111317
BibTeX
@article{Nicolcescu2026,
author = {Nicolcescu, Pantelie and Arbune, Manuela and Nechita, Aurel and Matei, Mădălina Nicoleta and Dinu, Ciprian Adrian and Ciubara, Anamaria and Popa, Gabriel Valeriu and Stefanescu, Ada and Mercuț, Maria Filofteia},
title = {A Novel Dual-Function Face-Shield Prototype Integrating an On-Demand Hand-Sanitiser Reservoir: Design and Preliminary Benchtop Evaluation},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {11},
pages = {1317},
doi = {10.3390/bioengineering13111317}
}
EUVIMED