EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Subsurface Fatigue Damage in Dental CAD/CAM Restorations: Intraoral Scanning vs. Optical Coherence Tomography

Christoph Moos iD, Julie-Jacqueline Kuhl, Bernd Wöstmann iD, Christin Grill iD, Ralf Brinkmann iD, Maximiliane Amelie Schlenz iD

Bioengineering · 14.07.2026 · 13 (7) · 808

DOI: 10.3390/bioengineering13070808 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 14.07.2026. Verfasst von Christoph Moos und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Christian Albrecht University of Kiel, University Hospital Schleswig-Holstein, Campus Kiel, Arnold-Heller-Str. 3, 24105…. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitätsklinikum Gießen und Marburg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study extended a previously established intraoral scanning (IOS) and optical coherence tomography (OCT) dual-modality monitoring workflow for computer-aided design/computer-aided manufacturing (CAD/CAM) restorations to three additional crown material classes alongside a resin composite (RECO) reference. Four material classes were investigated (n=8 each): RECO, polymer-infiltrated ceramic network (PICN), lithium disilicate ceramic (LDSC), and zirconia-reinforced lithium silicate ceramic (ZLSC). Monolithic crowns were adhesively luted to standardized human molar abutment teeth and aged by cyclic loading (50500N, 2Hz, 37 2∘C, up to 1250000 cycles) in a mouth-motion simulator. IOS and handheld OCT were performed at baseline and after every 250000 cycles under phantom-head conditions; correspondence was assessed using Spearman’s rank correlation coefficient (exploratory, uncorrected for multiple comparisons). OCT consistently showed higher defect extents than IOS across all material classes and timepoints. While no significant IOS-OCT associations were found for RECO and the PICN, OCT detected full-thickness vertical subsurface damage propagation from the earliest timepoint in LDSC and ZLSC, with IOS-derived surface wear remaining markedly lower. Surface-based monitoring alone did not reliably reflect subsurface damage propagation, a dissociation most pronounced in the vertical dimension and silicate-based materials. Intraoral OCT may provide complementary, non-invasive subsurface information to support individualized recall scheduling and minimally invasive repair decisions.

Schlagwörter

Stichwörter der Autor:innen

CAD/CAM materialsdental restorationdiagnostic imagingmaterials fatigueoptical coherence tomographysubsurface damage

Autor:innen und Institutionen

  • Department of Prosthodontics, Christian Albrecht University of Kiel, University Hospital Schleswig-Holstein, Campus Kiel, Arnold-Heller-Str. 3, 24105 Kiel, Germany.
  • Department of Prosthodontics, Justus Liebig University Giessen, Schlangenzahl 14, 35392 Giessen, Germany.
  • Medical Laser Center Lübeck, Peter-Monnik-Weg 4, 23562 Lübeck, Germany.
  • Institute of Biomedical Optics, University of Lübeck, Peter-Monnik-Weg 4, 23562 Lübeck, Germany.

ORCID-Profile: Christoph Moos, Bernd Wöstmann, Christin Grill, Ralf Brinkmann, Maximiliane Amelie Schlenz

Förderung

  • Universitätsklinikum Gießen und Marburg

Zitieren

APA

Moos, C., Kuhl, J. J., Wöstmann, B., Grill, C., Brinkmann, R., & Schlenz, M. A. (2026). Prediction of Subsurface Fatigue Damage in Dental CAD/CAM Restorations: Intraoral Scanning vs. Optical Coherence Tomography. Bioengineering, 13(7), 808. https://doi.org/10.3390/bioengineering13070808

Vancouver

Moos C, Kuhl JJ, Wöstmann B, Grill C, Brinkmann R, Schlenz MA. Prediction of Subsurface Fatigue Damage in Dental CAD/CAM Restorations: Intraoral Scanning vs. Optical Coherence Tomography. Bioengineering. 2026;13(7):808. doi:10.3390/bioengineering13070808

BibTeX
@article{Moos2026,
  author = {Moos, Christoph and Kuhl, Julie-Jacqueline and Wöstmann, Bernd and Grill, Christin and Brinkmann, Ralf and Schlenz, Maximiliane Amelie},
  title = {Prediction of Subsurface Fatigue Damage in Dental CAD/CAM Restorations: Intraoral Scanning vs. Optical Coherence Tomography},
  journal = {Bioengineering},
  year = {2026},
  volume = {13},
  number = {7},
  pages = {808},
  doi = {10.3390/bioengineering13070808}
}
Kostenlos starten →