Effects of Flat-Side Design on Torsional and Bending Stress of Nickel–Titanium File by Finite Element Analysis
Bioengineering · 22.05.2026 · 13 (6) · 600
DOI: 10.3390/bioengineering13060600 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 22.05.2026. Verfasst von Yinjie Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Center for Microscope Enhanced Dentistry, Beijing Stomatological Hospital, Capital Medical University, Beijing 100162, China. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
This study evaluated the effects of flattening the side of the bending resistance and torsional resistance of nickel–titanium files through finite element analysis of a novel flattened file and a standard nonflattened file.
Methods
For torsion analysis, the tip of the file was fixed at 3 mm, generating a torque of 2.5 N·mm at the handle. For bending analysis of curved root canals (45° and 60°), the handle was kept fixed, a force of 1 N was applied at the tip, and the file was fixed at 3 mm.
Results
The standard nonflattened file exhibited better torsional resistance. In contrast, the novel flattened file showed improved flexibility under 45° bending. Under this condition, lower maximum von Mises stress was observed in the flattened design compared with the standard file. At 60° bending, stress distribution varied with loading orientation, and higher stress concentrations were observed in the flattened file under specific bending directions, indicating reduced bending resistance under large deformation conditions.
Conclusions
Since lateral flattening may reduce the cyclic resistance of files, caution should be exercised in the clinical use of such files.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Microscope Enhanced Dentistry, Beijing Stomatological Hospital, Capital Medical University, Beijing 100162, China.
- School of Biomedical Engineering, Shanghai Jiao Tong University, Shanghai 200030, China.
- Department of Mechanics, School of Mechanics and Engineering Science, Peking University, Beijing 100871, China.
Zitieren
APA
Yang, Y., Cao, X., Zhang, J., Zhou, Y., Chen, S., & Hou, B. (2026). Effects of Flat-Side Design on Torsional and Bending Stress of Nickel–Titanium File by Finite Element Analysis. Bioengineering, 13(6), 600. https://doi.org/10.3390/bioengineering13060600
Vancouver
Yang Y, Cao X, Zhang J, Zhou Y, Chen S, Hou B. Effects of Flat-Side Design on Torsional and Bending Stress of Nickel–Titanium File by Finite Element Analysis. Bioengineering. 2026;13(6):600. doi:10.3390/bioengineering13060600
BibTeX
@article{Yang2026,
author = {Yang, Yinjie and Cao, Xinfang and Zhang, Jiwu and Zhou, Yuqing and Chen, Songhao and Hou, Benxiang},
title = {Effects of Flat-Side Design on Torsional and Bending Stress of Nickel–Titanium File by Finite Element Analysis},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {6},
pages = {600},
doi = {10.3390/bioengineering13060600}
}
EUVIMED