3D Printing for Pelvic Organ Prolapse Management: A Narrative Review of Emerging Applications
Bioengineering · 23.04.2026 · 13 (5) · 488
DOI: 10.3390/bioengineering13050488 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Bioengineering, online erschienen am 23.04.2026. Verfasst von Xinyi Wei und 7 weiteren Autor:innen. Beteiligte Einrichtung: Tianjian Laboratory of Advanced Biomedical Sciences, Department of Gynecology, the Third Affiliated Hospital of Zhengzhou University, Zhengzhou Unive…. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjian Laboratory, Tianjian Laboratory of Advanced Biomedical Sciences.
Abstract (Originalsprache)
Pelvic organ prolapse (POP) is a common benign gynecological disorder that substantially affects quality of life, particularly in aging female populations. Current management strategies, including standardized vaginal pessaries and synthetic surgical meshes, are often limited by poor anatomical adaptability, mechanical mismatch with native pelvic tissues, and long-term safety concerns. These limitations have driven increasing interest in personalized and biomechanically compatible therapeutic solutions. Three-dimensional (3D) printing, also known as additive manufacturing, has emerged as a promising bioengineering technology to address these unmet clinical needs. By enabling layer-by-layer fabrication directly from digital models, 3D printing allows for precise control over device geometry, mechanical properties, and material composition, facilitating patient-specific design. This narrative review summarizes recent progress in 3D printing for POP management across three major application domains: (i) next-generation meshes based on biodegradable polymers, elastomeric materials, natural biomaterials, and hydrogel systems; (ii) customized vaginal pessaries tailored to individual pelvic anatomy using imaging-assisted workflows; and (iii) imaging-based pelvic models and prototype devices for surgical planning, education, and exploratory assessment. Overall, existing studies demonstrate that 3D printing enables improved biomechanical compatibility, enhanced tissue integration, and multifunctional device design, including drug delivery capability. Although current evidence is largely pre-clinical or based on pilot studies, additive manufacturing holds strong potential to advance POP management toward safer, personalized, and functionally optimized clinical solutions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Tianjian Laboratory of Advanced Biomedical Sciences, Department of Gynecology, the Third Affiliated Hospital of Zhengzhou University, Zhengzhou University, Zhengzhou 450052, China.
- National Clinical Research Center for Obstetrics and Gynecology, Henan Branch, Zhengzhou 450052, China.
- Department of Pediatrics and Adolescent Medicine, University Hospital Erlangen, Friedrich-Alexander-University Erlangen-Nürnberg, 91054 Erlangen, Germany.
- Key Laboratory of Material Processing and Mold of Ministry of Education, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, 97-1 Wenhua Road, Zhengzhou 450002, China.
ORCID-Profile: Yannan Chen, Andre Hoerning, Xianhu Liu
Förderung
- Tianjian Laboratory
- Tianjian Laboratory of Advanced Biomedical Sciences
Zitieren
APA
Wei, X., Wang, X., Yang, X., Qiao, M., Chen, Y., Hoerning, A., Liu, X., & Ren, C. (2026). 3D Printing for Pelvic Organ Prolapse Management: A Narrative Review of Emerging Applications. Bioengineering, 13(5), 488. https://doi.org/10.3390/bioengineering13050488
Vancouver
Wei X, Wang X, Yang X, Qiao M, Chen Y, Hoerning A, et al. 3D Printing for Pelvic Organ Prolapse Management: A Narrative Review of Emerging Applications. Bioengineering. 2026;13(5):488. doi:10.3390/bioengineering13050488
BibTeX
@article{Wei2026,
author = {Wei, Xinyi and Wang, Xiaolong and Yang, Xin and Qiao, Mingjing and Chen, Yannan and Hoerning, Andre and Liu, Xianhu and Ren, Chenchen},
title = {3D Printing for Pelvic Organ Prolapse Management: A Narrative Review of Emerging Applications},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {5},
pages = {488},
doi = {10.3390/bioengineering13050488}
}
EUVIMED