EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Multilayer Structure-Graded Dental Zirconias

Ragai-Edward Matta iD, Renan Belli, Katrin Hurle iD, Arulraj Sangarapillai, Oleksandr Sednyev, Manfred Wichmann, Lara Berger iD

Bioengineering · 14.04.2026 · 13 (4) · 462

DOI: 10.3390/bioengineering13040462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 14.04.2026. Verfasst von Ragai-Edward Matta und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, University Hospital Erlangen, Glückstrasse 11, 91054 Erlangen, Germany. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multilayer zirconias have recently been introduced as dental biomaterials to combine improved translucency with sufficient mechanical reliability by implementing yttria-driven gradients in phase composition. Such materials can be considered functionally graded ceramics, where local phase stabilization influences strength and crack resistance. However, manufacturer-specific gradient profiles and their structure–property relationships remain insufficiently characterized. This study investigated two commercially available multilayer zirconias with distinct gradient concepts: IPS e.max® ZirCAD Prime (continuous gradient) and KATANA™ Zirconia YML (stepwise gradient). Ten equidistant sections along the blank height were analyzed using quantitative X-ray diffraction and Rietveld refinement to quantify zirconia phase fractions and estimate local Y2O3 content. Mechanical behavior was evaluated by biaxial flexural strength testing (ball-on-three-balls method) and fracture toughness testing using the chevron-notched beam technique. Both materials exhibited pronounced yttria- and phase-dependent gradients consistent with their reported layer designs. Regions with increased yttria content showed higher t″ fractions and reduced fracture toughness and strength, whereas deeper regions displayed increased mechanical performance associated with higher fractions of transformable tetragonal phase. These findings emphasize that multilayer zirconias exhibit spatially dependent mechanical properties, which should be considered in biomaterial selection and restoration design, particularly when balancing aesthetic demands and fracture resistance.

Schlagwörter

Stichwörter der Autor:innen

Rietveld refinementflexural strengthfracture toughnessfunctionally graded biomaterialsmultilayer zirconiaphase transformationyttria-stabilized zirconia

Autor:innen und Institutionen

  • Department of Prosthodontics, University Hospital Erlangen, Glückstrasse 11, 91054 Erlangen, Germany.
  • Research Laboratory for Dental Biomaterials, Department for Operative Dentistry and Periodontology, University Hospital Erlangen, Glückstrasse 11, 91054 Erlangen, Germany.
  • GeoZentrum Nordbayern, Mineralogy, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Schlossgarten 5a, 91054 Erlangen, Germany.

ORCID-Profile: Ragai-Edward Matta, Katrin Hurle, Lara Berger

Zitieren

APA

Matta, R. E., Belli, R., Hurle, K., Sangarapillai, A., Sednyev, O., Wichmann, M., & Berger, L. (2026). Characterization of Multilayer Structure-Graded Dental Zirconias. Bioengineering, 13(4), 462. https://doi.org/10.3390/bioengineering13040462

Vancouver

Matta RE, Belli R, Hurle K, Sangarapillai A, Sednyev O, Wichmann M, et al. Characterization of Multilayer Structure-Graded Dental Zirconias. Bioengineering. 2026;13(4):462. doi:10.3390/bioengineering13040462

BibTeX
@article{Matta2026,
  author = {Matta, Ragai-Edward and Belli, Renan and Hurle, Katrin and Sangarapillai, Arulraj and Sednyev, Oleksandr and Wichmann, Manfred and Berger, Lara},
  title = {Characterization of Multilayer Structure-Graded Dental Zirconias},
  journal = {Bioengineering},
  year = {2026},
  volume = {13},
  number = {4},
  pages = {462},
  doi = {10.3390/bioengineering13040462}
}
Kostenlos starten →