Impact of Ball-Milling and Thermal Hydrolysis on Physicochemical Properties and Anaerobic Digestion Kinetics of Mixed Slaughterhouse and Agricultural Wastes
Bioengineering · 11.03.2026 · 13 (3) · 326
DOI: 10.3390/bioengineering13030326 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 11.03.2026. Verfasst von Sang Heon Lee und 8 weiteren Autor:innen. Beteiligte Einrichtung: Korea Institute of Ceramic Engineering and Technology, Cheongju 28160, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Environmental Industry & Technology Institute.
Abstract (Originalsprache)
Slaughterhouse by-products are promising feedstocks for anaerobic digestion due to their high lipid and protein content. However, their complex structures often limit hydrolysis, and excessive pretreatment can induce inhibitory conditions. This study evaluates the effects of ball-milling (BM), ball-milling with water (BM + water), and combined thermal hydrolysis and ball-milling (THP + BM) on the digestion performance of a mixed substrate of slaughterhouse and agricultural wastes. The results demonstrate that all BM-based pretreatments significantly improved digestion kinetics, reducing the lag phase by 26–66% and shortening the T50 values by approximately 40% compared to the untreated substrate. While no statistically significant differences were observed in the ultimate methane yield, the onset of methanogenesis was markedly accelerated in the BM and BM + water treatments. In contrast, despite achieving superior solubilization, the THP + BM treatment failed to provide proportional kinetic enhancements. This was attributed to a severe initial metabolic imbalance—characterized by a pH drop below the inhibitory threshold (6.33)—which induced physiological stress and delayed the functional recovery of methanogens. These findings indicate that while ball-milling effectively facilitates digestion initiation by enhancing physical accessibility, the intensity of combined thermal-mechanical processes must be strategically optimized. For high-strength organic biomass, managing pretreatment severity is crucial to prevent initial acid stress and maximize process efficiency.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Korea Institute of Ceramic Engineering and Technology, Cheongju 28160, Republic of Korea.
- Department of Chemical Engineering, Hanyang University, Seoul 04763, Republic of Korea.
- KEC System Co. Ltd., Hwasung 18244, Republic of Korea.
ORCID-Profile: Byoung-In Sang, Jin Hyung Lee
Förderung
- Korea Environmental Industry & Technology Institute
Zitieren
APA
Lee, S. H., Gweon, O. H., Lee, H. S., Jeon, B. S., Go, Y., Jin, C. S., Yu, Y., Sang, B. I., & Lee, J. H. (2026). Impact of Ball-Milling and Thermal Hydrolysis on Physicochemical Properties and Anaerobic Digestion Kinetics of Mixed Slaughterhouse and Agricultural Wastes. Bioengineering, 13(3), 326. https://doi.org/10.3390/bioengineering13030326
Vancouver
Lee SH, Gweon OH, Lee HS, Jeon BS, Go Y, Jin CS, et al. Impact of Ball-Milling and Thermal Hydrolysis on Physicochemical Properties and Anaerobic Digestion Kinetics of Mixed Slaughterhouse and Agricultural Wastes. Bioengineering. 2026;13(3):326. doi:10.3390/bioengineering13030326
BibTeX
@article{Lee2026,
author = {Lee, Sang Heon and Gweon, Oh Hyun and Lee, Hye Sun and Jeon, Byoung Seung and Go, Youngwook and Jin, Chang Sook and Yu, Youngseob and Sang, Byoung-In and Lee, Jin Hyung},
title = {Impact of Ball-Milling and Thermal Hydrolysis on Physicochemical Properties and Anaerobic Digestion Kinetics of Mixed Slaughterhouse and Agricultural Wastes},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {3},
pages = {326},
doi = {10.3390/bioengineering13030326}
}
EUVIMED