EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automated Measurements of Tooth Size and Arch Widths on Cone-Beam Computerized Tomography and Scan Images of Plaster Dental Models

Thong Phi Nguyen, Jang-Hoon Ahn, Hyun-Kyo Lim, Ami Kim, Jonghun Yoon iD

Bioengineering · 29.12.2024 · 12 (1) · 22

DOI: 10.3390/bioengineering12010022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 29.12.2024. Verfasst von Thong Phi Nguyen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Design Engineering, Hanyang University, 222, Wangsimni-ro, Seongdongsu, Seoul 04763, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry, and Energy (MOTIE), Korea, KOREA HYDRO & NUCLEAR POWER CO., LTD, Ministry of Trade, Industry Energy (MOTIE, Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Measurements of tooth size for estimating inter-arch tooth size discrepancies and inter-tooth distances, essential for orthodontic diagnosis and treatment, are primarily done using traditional methods involving plaster models and calipers. These methods are time-consuming and labor-intensive, requiring multiple steps. With advances in cone-beam computerized tomography (CBCT) and intraoral scanning technology, these processes can now be automated through computer analyses. This study proposes a multi-step computational method for measuring mesiodistal tooth widths and inter-tooth distances, applicable to both CBCT and scan images of plaster models. The first step involves 3D segmentation of the upper and lower teeth using CBCT, combining results from sagittal and panoramic views. For intraoral scans, teeth are segmented from the gums. The second step identifies the teeth based on an adaptively estimated jaw midline using maximum intensity projection. The third step uses a decentralized convolutional neural network to calculate key points representing the parameters. The proposed method was validated against manual measurements by orthodontists using plaster models, achieving an intraclass correlation coefficient of 0.967 and a mean absolute error of less than 1 mm for all tooth types. An analysis of variance test confirmed the statistical consistency between the method’s measurements and those of human experts.

Schlagwörter

Stichwörter der Autor:innen

Mask-RCNNcone-beam computerized tomographykey points detectionteeth identificationteeth segmentation

Autor:innen und Institutionen

  • Department of Mechanical Design Engineering, Hanyang University, 222, Wangsimni-ro, Seongdongsu, Seoul 04763, Republic of Korea.
  • BK21 FOUR ERICA-ACE Center, Hanyang University, Ansan 15588, Gyeonggi-do, Republic of Korea.
  • Department of Orthodontics, Gwangmyeong Hospital, Chungang University, 110, Deokan-ro, Gwangmyeong 07440, Gyeonggi-do, Republic of Korea.
  • Department of Mechanical Engineering, Hanyang University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan 15588, Gyeonggi-do, Republic of Korea.
  • Seoul Ami Orthodontic Private Practice, 22, Harmony-ro, 178 Beon-gil, Yeonsu-gu, Incheon 22011, Republic of Korea.

ORCID-Profile: Jonghun Yoon

Förderung

  • Ministry of Trade, Industry, and Energy (MOTIE), Korea
  • KOREA HYDRO & NUCLEAR POWER CO., LTD
  • Ministry of Trade, Industry Energy (MOTIE, Korea)
  • Korea government (MSIT)

Zitieren

APA

Nguyen, T. P., Ahn, J. H., Lim, H. K., Kim, A., & Yoon, J. (2024). Automated Measurements of Tooth Size and Arch Widths on Cone-Beam Computerized Tomography and Scan Images of Plaster Dental Models. Bioengineering, 12(1), 22. https://doi.org/10.3390/bioengineering12010022

Vancouver

Nguyen TP, Ahn JH, Lim HK, Kim A, Yoon J. Automated Measurements of Tooth Size and Arch Widths on Cone-Beam Computerized Tomography and Scan Images of Plaster Dental Models. Bioengineering. 2024;12(1):22. doi:10.3390/bioengineering12010022

BibTeX
@article{Nguyen2024,
  author = {Nguyen, Thong Phi and Ahn, Jang-Hoon and Lim, Hyun-Kyo and Kim, Ami and Yoon, Jonghun},
  title = {Automated Measurements of Tooth Size and Arch Widths on Cone-Beam Computerized Tomography and Scan Images of Plaster Dental Models},
  journal = {Bioengineering},
  year = {2024},
  volume = {12},
  number = {1},
  pages = {22},
  doi = {10.3390/bioengineering12010022}
}
Kostenlos starten →