Investigation of the Effect of High Shear Stress on Mesenchymal Stem Cells Using a Rotational Rheometer in a Small-Angle Cone–Plate Configuration
Bioengineering · 11.10.2024 · 11 (10) · 1011
DOI: 10.3390/bioengineering11101011 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 11.10.2024. Verfasst von Mario Mand und 4 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Microfluidics, Faculty of Mechanical Engineering and Marine Technology, University of Rostock, 18059 Rostock, Germany. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund (ERDF) and the Ministry for Economics, Employment and Health of Mecklenburg-Vorpommern, Germany, the European Regional Developement Fund (ERDF) and the Ministry for Economics, Employment and Health of Mecklenburg Vorpommern, Germany.
Abstract (Originalsprache)
Within the healthy human body, cells reside within the physiological environment of a tissue compound. Here, they are subject to constant low levels of mechanical stress that can influence the growth and differentiation of the cells. The liposuction of adipose tissue and the subsequent isolation of mesenchymal stem/stromal cells (MSCs), for example, are procedures that induce a high level of mechanical shear stress. As MSCs play a central role in tissue regeneration by migrating into regenerating areas and driving regeneration through proliferation and tissue-specific differentiation, they are increasingly used in therapeutic applications. Consequently, there is a strong interest in investigating the effects of shear stress on MSCs. In this study, we present a set-up for applying high shear rates to cells based on a rotational rheometer with a small-angle cone–plate configuration. This set-up was used to investigate the effect of various shear stresses on human adipose-derived MSCs in suspension. The results of the study show that the viability of the cells remained unaffected up to 18.38 Pa for an exposure time of 5 min. However, it was observed that intense shear stress damaged the cells, with longer treatment durations increasing the percentage of cell debris.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chair of Microfluidics, Faculty of Mechanical Engineering and Marine Technology, University of Rostock, 18059 Rostock, Germany.
- Institute of Cell Biology, Rostock University Medical Center, 18057 Rostock, Germany.
- Human Med AG, 19061 Schwerin, Germany.
- Department of Life, Light and Matter, University of Rostock, 18059 Rostock, Germany.
ORCID-Profile: Olga Hahn, Juliane Meyer, Kirsten Peters, Hermann Seitz
Förderung
- European Regional Development Fund (ERDF) and the Ministry for Economics, Employment and Health of Mecklenburg-Vorpommern, Germany
- the European Regional Developement Fund (ERDF) and the Ministry for Economics, Employment and Health of Mecklenburg Vorpommern, Germany
Zitieren
APA
Mand, M., Hahn, O., Meyer, J., Peters, K., & Seitz, H. (2024). Investigation of the Effect of High Shear Stress on Mesenchymal Stem Cells Using a Rotational Rheometer in a Small-Angle Cone–Plate Configuration. Bioengineering, 11(10), 1011. https://doi.org/10.3390/bioengineering11101011
Vancouver
Mand M, Hahn O, Meyer J, Peters K, Seitz H. Investigation of the Effect of High Shear Stress on Mesenchymal Stem Cells Using a Rotational Rheometer in a Small-Angle Cone–Plate Configuration. Bioengineering. 2024;11(10):1011. doi:10.3390/bioengineering11101011
BibTeX
@article{Mand2024,
author = {Mand, Mario and Hahn, Olga and Meyer, Juliane and Peters, Kirsten and Seitz, Hermann},
title = {Investigation of the Effect of High Shear Stress on Mesenchymal Stem Cells Using a Rotational Rheometer in a Small-Angle Cone–Plate Configuration},
journal = {Bioengineering},
year = {2024},
volume = {11},
number = {10},
pages = {1011},
doi = {10.3390/bioengineering11101011}
}
EUVIMED