EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Finite Element Method Study of Stress Distribution in Dental Hard Tissues: Impact of Access Cavity Design and Restoration Material

Mihaela-Roxana Boțilă, Dragos Laurențiu Popa, Răzvan Mercuț, Monica Mihaela Iacov-Crăițoiu, Monica Scrieciu, Sanda Mihaela Popescu iD, Veronica Mercuț

Bioengineering · 29.08.2024 · 11 (9) · 878

DOI: 10.3390/bioengineering11090878 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 29.08.2024. Verfasst von Mihaela-Roxana Boțilă und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Medicine and Pharmacy of Craiova, Romania.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design of the access cavity is an important factor in endodontic treatment for the further evolution of the tooth. The objective of this study was to highlight the most favorable access cavity design (TrussAC, UltraAC, TradAC, CariesAC, ConsAC, RestoAC) based on the stress distribution on virtual models of mandibular molars. To achieve the objectives of the study, four series of virtual models of six molars were made. The first two series of external virtual models were obtained based on the three-dimensional scanning of the molars before the access cavity preparation and after their restoration, to obtain the density of the restorative materials. Internal morphology was added to the next two series of virtual models and after that, materials were added, specific for root canal obturation and coronal restoration. The simulations were performed for two coronary restoration materials, bulk fill composite and amalgam. The results showed, based on the stress maps, that the highest values were recorded for CariesAC and the lowest values for UltraAC. Comparing the two restorative materials, the lowest level of stress, strains, and displacements was highlighted in the case of UltraAC, TradAC, and ConsAC cavities for amalgam. The results obtained in this study should guide doctors towards a conservative attitude with the preservation of as much hard tissue as possible and the differentiated use of restorative materials according to the amount of tissue lost when preparing the access cavity.

Schlagwörter

Stichwörter der Autor:innen

access cavityendodontic treatmentfinite element analysisstress analysis

Autor:innen und Institutionen

  • Department of Prosthetic Dentistry, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania.
  • Department of Automotive, Transportation and Industrial Engineering, Faculty of Mechanics, University of Craiova, 200478 Craiova, Romania.
  • Department of Plastic Surgery, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania.
  • Department of Oral Rehabilitation, University of Medicine and Pharmacy of Craiova, 200349 Craiova, Romania.

ORCID-Profile: Sanda Mihaela Popescu

Förderung

  • University of Medicine and Pharmacy of Craiova, Romania

Zitieren

APA

Boțilă, M. R., Popa, D. L., Mercuț, R., Iacov-Crăițoiu, M. M., Scrieciu, M., Popescu, S. M., & Mercuț, V. (2024). A Finite Element Method Study of Stress Distribution in Dental Hard Tissues: Impact of Access Cavity Design and Restoration Material. Bioengineering, 11(9), 878. https://doi.org/10.3390/bioengineering11090878

Vancouver

Boțilă MR, Popa DL, Mercuț R, Iacov-Crăițoiu MM, Scrieciu M, Popescu SM, et al. A Finite Element Method Study of Stress Distribution in Dental Hard Tissues: Impact of Access Cavity Design and Restoration Material. Bioengineering. 2024;11(9):878. doi:10.3390/bioengineering11090878

BibTeX
@article{Boil2024,
  author = {Boțilă, Mihaela-Roxana and Popa, Dragos Laurențiu and Mercuț, Răzvan and Iacov-Crăițoiu, Monica Mihaela and Scrieciu, Monica and Popescu, Sanda Mihaela and Mercuț, Veronica},
  title = {A Finite Element Method Study of Stress Distribution in Dental Hard Tissues: Impact of Access Cavity Design and Restoration Material},
  journal = {Bioengineering},
  year = {2024},
  volume = {11},
  number = {9},
  pages = {878},
  doi = {10.3390/bioengineering11090878}
}
Kostenlos starten →