A Real-Time Control Method for Upper Limb Exoskeleton Based on Active Torque Prediction Model
Bioengineering · 18.12.2023 · 10 (12) · 1441
DOI: 10.3390/bioengineering10121441 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 18.12.2023. Verfasst von Sujiao Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Rehabilitation Engineering and Technology, University of Shanghai for Science and Technology, Shanghai 200093, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
Exoskeleton rehabilitation robots have been widely used in the rehabilitation treatment of stroke patients. Clinical studies confirmed that rehabilitation training with active movement intentions could improve the effectiveness of rehabilitation treatment significantly. This research proposes a real-time control method for an upper limb exoskeleton based on the active torque prediction model. To fulfill the goal of individualized and precise rehabilitation, this method has an adjustable parameter assist ratio that can change the strength of the assist torque under the same conditions. In this study, upper limb muscles’ EMG signals and elbow angle were chosen as the sources of control signals. The active torque prediction model was then trained using a BP neural network after appropriately extracting features. The model exhibited good accuracy on PC and embedded systems, according to the experimental results. In the embedded system, the RMSE of this model was 0.1956 N·m and 94.98%. In addition, the proposed real-time control system also had an extremely low delay of only 40 ms, which would significantly increase the adaptability of human–computer interactions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Rehabilitation Engineering and Technology, University of Shanghai for Science and Technology, Shanghai 200093, China.
- Shanghai Engineering Research Center of Assistive Devices, Shanghai 200093, China.
- Key Laboratory of Neural-Functional Information and Rehabilitation Engineering of the Ministry of Civil Affairs, Shanghai 200093, China.
ORCID-Profile: Lei Zhang, Qiaoling Meng
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Li, S., Zhang, L., Meng, Q., & Yu, H. (2023). A Real-Time Control Method for Upper Limb Exoskeleton Based on Active Torque Prediction Model. Bioengineering, 10(12), 1441. https://doi.org/10.3390/bioengineering10121441
Vancouver
Li S, Zhang L, Meng Q, Yu H. A Real-Time Control Method for Upper Limb Exoskeleton Based on Active Torque Prediction Model. Bioengineering. 2023;10(12):1441. doi:10.3390/bioengineering10121441
BibTeX
@article{Li2023,
author = {Li, Sujiao and Zhang, Lei and Meng, Qiaoling and Yu, Hongliu},
title = {A Real-Time Control Method for Upper Limb Exoskeleton Based on Active Torque Prediction Model},
journal = {Bioengineering},
year = {2023},
volume = {10},
number = {12},
pages = {1441},
doi = {10.3390/bioengineering10121441}
}
EUVIMED