EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Direct Integration of 3D Printing and Cryogel Scaffolds for Bone Tissue Engineering

Levi M Olevsky iD, Amritha Anup, Mason Jacques iD, Nadia Keokominh, Eric P Holmgren, Katherine R Hixon iD

Bioengineering · 27.07.2023 · 10 (8) · 889

DOI: 10.3390/bioengineering10080889 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 27.07.2023. Verfasst von Levi M Olevsky und 5 weiteren Autor:innen. Beteiligte Einrichtung: Thayer School of Engineering, Dartmouth College, Hanover, NH 03755, USA. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation (NSF) EPSCoR.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cryogels, known for their biocompatibility and porous structure, lack mechanical strength, while 3D-printed scaffolds have excellent mechanical properties but limited porosity resolution. By combining a 3D-printed plastic gyroid lattice scaffold with a chitosan–gelatin cryogel scaffold, a scaffold can be created that balances the advantages of both fabrication methods. This study compared the pore diameter, swelling potential, mechanical characteristics, and cellular infiltration capability of combined scaffolds and control cryogels. The incorporation of the 3D-printed lattice demonstrated patient-specific geometry capabilities and significantly improved mechanical strength compared to the control cryogel. The combined scaffolds exhibited similar porosity and relative swelling ratio to the control cryogels. However, they had reduced elasticity, reduced absolute swelling capacity, and are potentially cytotoxic, which may affect their performance. This paper presents a novel approach to combine two scaffold types to retain the advantages of each scaffold type while mitigating their shortcomings.

Schlagwörter

Stichwörter der Autor:innen

3D printingbone graft substitutebone healingcryogelgyroidscaffoldtissue engineering

Autor:innen und Institutionen

  • Thayer School of Engineering, Dartmouth College, Hanover, NH 03755, USA.
  • College of Engineering and Physical Sciences, University of New Hampshire, Durham, NH 03824, USA.
  • Geisel School of Medicine, Dartmouth College, Hanover, NH 03755, USA.

ORCID-Profile: Levi M Olevsky, Mason Jacques, Katherine R Hixon

Förderung

  • National Science Foundation (NSF) EPSCoR

Zitieren

APA

Olevsky, L. M., Anup, A., Jacques, M., Keokominh, N., Holmgren, E. P., & Hixon, K. R. (2023). Direct Integration of 3D Printing and Cryogel Scaffolds for Bone Tissue Engineering. Bioengineering, 10(8), 889. https://doi.org/10.3390/bioengineering10080889

Vancouver

Olevsky LM, Anup A, Jacques M, Keokominh N, Holmgren EP, Hixon KR. Direct Integration of 3D Printing and Cryogel Scaffolds for Bone Tissue Engineering. Bioengineering. 2023;10(8):889. doi:10.3390/bioengineering10080889

BibTeX
@article{Olevsky2023,
  author = {Olevsky, Levi M and Anup, Amritha and Jacques, Mason and Keokominh, Nadia and Holmgren, Eric P and Hixon, Katherine R},
  title = {Direct Integration of 3D Printing and Cryogel Scaffolds for Bone Tissue Engineering},
  journal = {Bioengineering},
  year = {2023},
  volume = {10},
  number = {8},
  pages = {889},
  doi = {10.3390/bioengineering10080889}
}
Kostenlos starten →