Surface Modification of Cyclic-Olefin-Copolymer (COC)-Based Microchannels for the Large-Scale Industrial Production of Droplet Microfluidic Devices
Bioengineering · 25.06.2023 · 10 (7) · 763
DOI: 10.3390/bioengineering10070763 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 25.06.2023. Verfasst von Yefeng Guan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Biomaterials of Guangdong Higher Education Institutes, Department of Biomedical Engineering, Jinan University, Guangzhou 510632, Ch…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation;Science and Technology Program of Guangzhou;Basic Research Program of Guangzhou;Foundation for Distinguis…, Guangdong Basic and Applied Basic Research Foundation, Science and Technology Program of Guangzhou.
Abstract (Originalsprache)
The copolymers of cycloolefin (COC), a type of thermoplastic material, have been widely used for the large-scale industrial fabrication of droplet microfluidic devices, which is often performed using hot-embossing or injection-molding techniques. The generation of droplets and the uniformity of droplet sizes are significantly affected by the surface wettability of COC during fabrication and the pressure stability of the employed fluid pump during operation. In order to alleviate the effects of undesirable surface wettability and pressure variation on the generation of droplets in COC-based devices, a simple surface modification procedure was applied to hydrophobically modify the surfaces of COC-based microchannels for large-scale industrial production. The surface modification procedure consisted of an oxygen plasma treatment of the polymer surface followed by a solution-phase reaction in fluorocarbon solvent. The experimental results demonstrate that following the proposed surface modification, the COC droplet microfluidic devices could stably generate microvolume water droplets with a small coefficient of variation, even if the pressure of the dispersed phase (water) fluctuated. The durability test results regarding the modified surfaces show that the hydrophobicity of the modified COC surfaces could be sustained for up to four months, deteriorating with time thereafter. Our study can provide a potential solution useful in and guidance for the large-scale industrial production of droplet microfluidic devices for various applications, including polymerase chain reaction and single-cell analysis.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Biomaterials of Guangdong Higher Education Institutes, Department of Biomedical Engineering, Jinan University, Guangzhou 510632, China.
- Guangdong Shunde Innovative Design Institute, Foshan 528300, China.
- Guangdong Foshan Lianchuang Graduate of Engineering, Foshan 528300, China.
- Guangdong Provincial Key Laboratory of Optical Information Materials and Technology & Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou 510…
ORCID-Profile: Zhibin Yan
Förderung
- Guangdong Basic and Applied Basic Research Foundation;Science and Technology Program of Guangzhou;Basic Research Program of Guangzhou;Foundation for Distinguis…
- Guangdong Basic and Applied Basic Research Foundation
- Science and Technology Program of Guangzhou
- Basic Research Program of Guangzhou
- Foundation for Distinguished Young Talents in Higher Education of Guangdong
- Guangdong Provincial Key Laboratory of Optical Information Materials and Technology
- Research Cultivation Fund for Young Faculty by South China Normal University (SCNU)
Zitieren
APA
Guan, Y., Zhang, H., Yan, Z., Wei, X., Zhang, Z., & Chen, X. (2023). Surface Modification of Cyclic-Olefin-Copolymer (COC)-Based Microchannels for the Large-Scale Industrial Production of Droplet Microfluidic Devices. Bioengineering, 10(7), 763. https://doi.org/10.3390/bioengineering10070763
Vancouver
Guan Y, Zhang H, Yan Z, Wei X, Zhang Z, Chen X. Surface Modification of Cyclic-Olefin-Copolymer (COC)-Based Microchannels for the Large-Scale Industrial Production of Droplet Microfluidic Devices. Bioengineering. 2023;10(7):763. doi:10.3390/bioengineering10070763
BibTeX
@article{Guan2023,
author = {Guan, Yefeng and Zhang, Huiru and Yan, Zhibin and Wei, Xue and Zhang, Zhuo and Chen, Xuelian},
title = {Surface Modification of Cyclic-Olefin-Copolymer (COC)-Based Microchannels for the Large-Scale Industrial Production of Droplet Microfluidic Devices},
journal = {Bioengineering},
year = {2023},
volume = {10},
number = {7},
pages = {763},
doi = {10.3390/bioengineering10070763}
}
EUVIMED