EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges

Ahmed G Abdelaziz iD, Hassan Nageh iD, Sara M Abdo, Mohga S Abdalla iD, Asmaa A Amer, Abdalla Abdal-Hay iD, Ahmed Barhoum iD

Bioengineering · 03.02.2023 · 10 (2) · 204

DOI: 10.3390/bioengineering10020204 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Bioengineering, online erschienen am 03.02.2023. Verfasst von Ahmed G Abdelaziz und 6 weiteren Autor:innen. Beteiligte Einrichtung: Biochemistry Division, Chemistry Department, Faculty of Science, Helwan University, Cairo 11795, Egypt. Die Arbeit wurde bisher 183-mal zitiert (Crossref) und nennt 249 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Joint Egyptian Japanese Scientific Cooperation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Over the last few years, biopolymers have attracted great interest in tissue engineering and regenerative medicine due to the great diversity of their chemical, mechanical, and physical properties for the fabrication of 3D scaffolds. This review is devoted to recent advances in synthetic and natural polymeric 3D scaffolds for bone tissue engineering (BTE) and regenerative therapies. The review comprehensively discusses the implications of biological macromolecules, structure, and composition of polymeric scaffolds used in BTE. Various approaches to fabricating 3D BTE scaffolds are discussed, including solvent casting and particle leaching, freeze-drying, thermally induced phase separation, gas foaming, electrospinning, and sol–gel techniques. Rapid prototyping technologies such as stereolithography, fused deposition modeling, selective laser sintering, and 3D bioprinting are also covered. The immunomodulatory roles of polymeric scaffolds utilized for BTE applications are discussed. In addition, the features and challenges of 3D polymer scaffolds fabricated using advanced additive manufacturing technologies (rapid prototyping) are addressed and compared to conventional subtractive manufacturing techniques. Finally, the challenges of applying scaffold-based BTE treatments in practice are discussed in-depth.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbiopolymerscustomized therapy 3D scaffoldsnanofabrication techniquesrapid prototypingtissue engineering and regenerative medicine

Autor:innen und Institutionen

  • Biochemistry Division, Chemistry Department, Faculty of Science, Helwan University, Cairo 11795, Egypt.
  • Nanotechnology Research Centre (NTRC), The British University in Egypt, Cairo 11837, Egypt.
  • Department of Pharmacognosy, Pharmaceutical and Drug Industries Research Institute, National Research Centre, Giza 12622, Egypt.
  • Department of Mechanical Engineering, Faculty of Engineering, South Valley University, Qena 83523, Egypt.
  • Faculty of Industry and Energy Technology, Mechatronics Technology Program, New Cairo Technological University, Cairo 11835, Egypt.
  • School of Chemical Sciences, Dublin City University, D09 Y074 Dublin, Ireland.

ORCID-Profile: Ahmed G Abdelaziz, Hassan Nageh, Mohga S Abdalla, Abdalla Abdal-Hay, Ahmed Barhoum

Förderung

  • Joint Egyptian Japanese Scientific Cooperation

Zitieren

APA

Abdelaziz, A. G., Nageh, H., Abdo, S. M., Abdalla, M. S., Amer, A. A., Abdal-Hay, A., & Barhoum, A. (2023). A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges. Bioengineering, 10(2), 204. https://doi.org/10.3390/bioengineering10020204

Vancouver

Abdelaziz AG, Nageh H, Abdo SM, Abdalla MS, Amer AA, Abdal-Hay A, et al. A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges. Bioengineering. 2023;10(2):204. doi:10.3390/bioengineering10020204

BibTeX
@article{Abdelaziz2023,
  author = {Abdelaziz, Ahmed G and Nageh, Hassan and Abdo, Sara M and Abdalla, Mohga S and Amer, Asmaa A and Abdal-Hay, Abdalla and Barhoum, Ahmed},
  title = {A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges},
  journal = {Bioengineering},
  year = {2023},
  volume = {10},
  number = {2},
  pages = {204},
  doi = {10.3390/bioengineering10020204}
}
Kostenlos starten →