Aptasensor for the Detection of Moraxella catarrhalis Adhesin UspA2
Bioengineering · 31.01.2023 · 10 (2) · 178
DOI: 10.3390/bioengineering10020178 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioengineering, online erschienen am 31.01.2023. Verfasst von Maria G Sande und 8 weiteren Autor:innen. Beteiligte Einrichtung: CEB-Centre of Biological Engineering, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, The Research Council of Norway, the EU Horizon 2020 Research and Innovation Programme.
Abstract (Originalsprache)
Innovative point-of-care (PoC) diagnostic platforms are desirable to surpass the deficiencies of conventional laboratory diagnostic methods for bacterial infections and to tackle the growing antimicrobial resistance crisis. In this study, a workflow was implemented, comprising the identification of new aptamers with high affinity for the ubiquitous surface protein A2 (UspA2) of the bacterial pathogen Moraxella catarrhalis and the development of an electrochemical biosensor functionalized with the best-performing aptamer as a bioreceptor to detect UspA2. After cell-systematic evolution of ligands by exponential enrichment (cell-SELEX) was performed, next-generation sequencing was used to sequence the final aptamer pool. The most frequent aptamer sequences were further evaluated using bioinformatic tools. The two most promising aptamer candidates, Apt1 and Apt1_RC (Apt1 reverse complement), had Kd values of 214.4 and 3.4 nM, respectively. Finally, a simple and label-free electrochemical biosensor was functionalized with Apt1_RC. The aptasensor surface modifications were confirmed by impedance spectroscopy and cyclic voltammetry. The ability to detect UspA2 was evaluated by square wave voltammetry, exhibiting a linear detection range of 4.0 × 104–7.0 × 107 CFU mL−1, a square correlation coefficient superior to 0.99 and a limit of detection of 4.0 × 104 CFU mL−1 at pH 5.0. The workflow described has the potential to be part of a sensitive PoC diagnostic platform to detect and quantify M. catarrhalis from biological samples.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CEB-Centre of Biological Engineering, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal.
- LABBELS-Associate Laboratory, 4710-057 Braga, Portugal.
- Section for Genetics and Evolutionary Biology, Department of Biosciences, University of Oslo, 0316 Oslo, Norway.
- BioMark-CINTESIS/ISEP, School of Engineering, Polytechnic Institute of Porto, 4219-015 Porto, Portugal.
ORCID-Profile: Maria G Sande, Débora Ferreira, Joana L Rodrigues, Luís D R Melo, Dirk Linke, Felismina T C Moreira, Maria Goreti F Sales, Ligia R Rodrigues
Förderung
- Fundação para a Ciência e Tecnologia
- The Research Council of Norway
- the EU Horizon 2020 Research and Innovation Programme
- LABBELS—Associate Laboratory in Biotechnology, Bioengineering and Microelectromechanical Systems
- Scientific Employment Stimulus Program
Zitieren
APA
Sande, M. G., Ferreira, D., Rodrigues, J. L., Melo, L. D. R., Saragliadis, A., Linke, D., Moreira, F. T. C., Sales, M. G. F., & Rodrigues, L. R. (2023). Aptasensor for the Detection of Moraxella catarrhalis Adhesin UspA2. Bioengineering, 10(2), 178. https://doi.org/10.3390/bioengineering10020178
Vancouver
Sande MG, Ferreira D, Rodrigues JL, Melo LDR, Saragliadis A, Linke D, et al. Aptasensor for the Detection of Moraxella catarrhalis Adhesin UspA2. Bioengineering. 2023;10(2):178. doi:10.3390/bioengineering10020178
BibTeX
@article{Sande2023,
author = {Sande, Maria G and Ferreira, Débora and Rodrigues, Joana L and Melo, Luís D R and Saragliadis, Athanasios and Linke, Dirk and Moreira, Felismina T C and Sales, Maria Goreti F and Rodrigues, Ligia R},
title = {Aptasensor for the Detection of Moraxella catarrhalis Adhesin UspA2},
journal = {Bioengineering},
year = {2023},
volume = {10},
number = {2},
pages = {178},
doi = {10.3390/bioengineering10020178}
}
EUVIMED