EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Co-Sintering of Li1.3Al0.3Ti1.7(PO4)3 and LiFePO4 in Tape-Casted Composite Cathodes for Oxide Solid-State Batteries

Jean Philippe Beaupain, Katja Waetzig, Henry Auer, Nicolas Zapp, Kristian Nikolowski, Mareike Partsch, Mihails Kusnezoff, Alexander Michaelis

Batteries · 02.11.2023 · 9 (11) · 543

DOI: 10.3390/batteries9110543 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 02.11.2023. Verfasst von Jean Philippe Beaupain und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry of Education and Research (Germany), Fraunhofer Gesellschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid-state batteries (SSBs) with Li-ion conductive electrolytes made from polymers, thiophosphates (sulfides) or oxides instead of liquid electrolytes have different challenges in material development and manufacturing. For oxide-based SSBs, the co-sintering of a composite cathode is one of the main challenges. High process temperatures cause undesired decomposition reactions of the active material and the solid electrolyte. The formed phases inhibit the high energy and power density of ceramic SSBs. Therefore, the selection of suitable material combinations as well as the reduction of the sintering temperatures are crucial milestones in the development of ceramic SSBs. In this work, the co-sintering behavior of Li1.3Al0.3Ti1.7(PO4)3 (LATP) as a solid electrolyte with Li-ion conductivity of ≥0.38 mS/cm and LiFePO4 with a C-coating (LFP) as a Li-ion storage material (active material) is investigated. The shrinkage behavior, crystallographic analysis and microstructural changes during co-sintering at temperatures between 650 and 850 °C are characterized in a simplified model system by mixing, pressing and sintering the LATP and LFP and compared with tape-casted composite cathodes (d = 55 µm). The tape-casted and sintered composite cathodes were infiltrated by liquid electrolyte as well as polyethylene oxide (PEO) electrolyte and electrochemically characterized as half cells against a Li metal anode. The results indicate the formation of reaction layers between LATP and LFP during co-sintering. At Ts > 750 °C, the rhombohedral LATP phase is transformed into an orthorhombic Li1.3+xAl0.3−yFex+yTi1.7−x(PO4)3 (LAFTP) phase. During co-sintering, Fe3+ diffuses into the LATP phase and partially occupies the Al3+ and Ti4+ sites of the NASICON structure. The formation of this LAFTP leads to significant changes in the electrochemical properties of the infiltrated composite tapes. Nevertheless, a high specific capacity of 134 mAh g−1 is measured by infiltrating the sintered composite tapes with liquid electrolytes. Additionally, infiltration with a PEO electrolyte leads to a capacity of 125 mAh g−1. Therefore, the material combination of LATP and LFP is a promising approach to realize sintered ceramic SSBs.

Förderung

  • German Federal Ministry of Education and Research (Germany)
  • Fraunhofer Gesellschaft

Zitieren

APA

Beaupain, J. P., Waetzig, K., Auer, H., Zapp, N., Nikolowski, K., Partsch, M., Kusnezoff, M., & Michaelis, A. (2023). Co-Sintering of Li1.3Al0.3Ti1.7(PO4)3 and LiFePO4 in Tape-Casted Composite Cathodes for Oxide Solid-State Batteries. Batteries, 9(11), 543. https://doi.org/10.3390/batteries9110543

Vancouver

Beaupain JP, Waetzig K, Auer H, Zapp N, Nikolowski K, Partsch M, et al. Co-Sintering of Li1.3Al0.3Ti1.7(PO4)3 and LiFePO4 in Tape-Casted Composite Cathodes for Oxide Solid-State Batteries. Batteries. 2023;9(11):543. doi:10.3390/batteries9110543

BibTeX
@article{Beaupain2023,
  author = {Beaupain, Jean Philippe and Waetzig, Katja and Auer, Henry and Zapp, Nicolas and Nikolowski, Kristian and Partsch, Mareike and Kusnezoff, Mihails and Michaelis, Alexander},
  title = {Co-Sintering of Li1.3Al0.3Ti1.7(PO4)3 and LiFePO4 in Tape-Casted Composite Cathodes for Oxide Solid-State Batteries},
  journal = {Batteries},
  year = {2023},
  volume = {9},
  number = {11},
  pages = {543},
  doi = {10.3390/batteries9110543}
}
Kostenlos starten →