EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solid-State Lithium Batteries with Cathode-Supported Composite Solid Electrolytes Enabling High-Rate Capability and Excellent Cyclic Performance

Kang-Feng Chang, Pradeep Kumar Panda, Chien-Te Hsieh, Po-Chih Yang, Navish Kataria, Kuan Shiong Khoo

Batteries · 26.09.2023 · 9 (10) · 490

DOI: 10.3390/batteries9100490 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 26.09.2023. Verfasst von Kang-Feng Chang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science of Technology Council (NSTC) Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, robust composite solid electrolytes were developed and employed to enhance the performance of Li-metal batteries significantly. The robust composite solid electrolytes are composed of a soft polymer, poly(ethylene oxide), a Li salt, bis(trifluoromethanesulfonyl)imide (LiTFSI), and super ionic conductive ceramic fillers such as Li1.5Al0.5Ti1.5(PO4)3 (LATP), and Li6.4La3Zr1.4Ta0.6O12 (LLZTO). The main goal of this study is to enhance the electrochemical stability and ionic conductivity. The ionic conductivities of the composite solid electrolytes were found to be 2.08 × 10−4 and 1.64 × 10−4 S cm−1 with the introduction of LATP and LLZTO fillers, respectively. The results prove that the fabricated solid electrolyte was electrochemical stable at voltage exceeding 4.25 V vs. Li/Li+. The internal resistance of the solid electrolyte significantly reduced compared to gel electrolyte. This reduction can be attributed to the alleviation of bulk electrolyte, charge-transfer, and interfacial electrolyte/electrode impedance. When LiFePO4 cathode sheets are coated with a composite solid electrolyte containing LATP powders, the resulting Li-metal battery displays high capacity at 5 C (with a capacity retention of 65.2% compared to the original capacity at 0.2 C) as well as superior cyclic stability and excellent Coulombic efficiency (>99.5%, 200 cycles). These results confirm that the composite solid electrolyte acts as a protective layer which has the ability to prevent the growth of Li dendrites. Consequently, the fabricated electrolyte configuration can be engineered to enable high energy/power density and electrochemical stable cyclability in Li-metal batteries.

Förderung

  • National Science of Technology Council (NSTC) Taiwan

Zitieren

APA

Chang, K., Panda, P. K., Hsieh, C., Yang, P., Kataria, N., & Khoo, K. S. (2023). Solid-State Lithium Batteries with Cathode-Supported Composite Solid Electrolytes Enabling High-Rate Capability and Excellent Cyclic Performance. Batteries, 9(10), 490. https://doi.org/10.3390/batteries9100490

Vancouver

Chang K, Panda PK, Hsieh C, Yang P, Kataria N, Khoo KS. Solid-State Lithium Batteries with Cathode-Supported Composite Solid Electrolytes Enabling High-Rate Capability and Excellent Cyclic Performance. Batteries. 2023;9(10):490. doi:10.3390/batteries9100490

BibTeX
@article{Chang2023,
  author = {Chang, Kang-Feng and Panda, Pradeep Kumar and Hsieh, Chien-Te and Yang, Po-Chih and Kataria, Navish and Khoo, Kuan Shiong},
  title = {Solid-State Lithium Batteries with Cathode-Supported Composite Solid Electrolytes Enabling High-Rate Capability and Excellent Cyclic Performance},
  journal = {Batteries},
  year = {2023},
  volume = {9},
  number = {10},
  pages = {490},
  doi = {10.3390/batteries9100490}
}
Kostenlos starten →