EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Systematic Workflow for Efficient Identification of Local Representative Elementary Volumes Demonstrated with Lithium-Ion Battery Cathode Microstructures

Benjamin Kellers, Martin P. Lautenschlaeger, Nireas Rigos, Julius Weinmiller, Timo Danner, Arnulf Latz

Batteries · 22.07.2023 · 9 (7) · 390

DOI: 10.3390/batteries9070390 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 22.07.2023. Verfasst von Benjamin Kellers und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 Research and Innovation Programme within the project “DEFACTO”, Federal Ministry for Economic Affairs and Climate Action within the project “Structur.E”.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The concept of a representative elementary volume (REV) is key for connecting results of pore-scale simulations with continuum properties of microstructures. Current approaches define REVs only based on their size as the smallest volume in a heterogeneous material independent of its location and under certain aspects representing the same material at the continuum scale. However, the determination of such REVs is computationally expensive and time-consuming, as many costly simulations are often needed. Therefore, presented here is an efficient, systematic, and predictive workflow for the identification of REVs. The main differences from former studies are: (1) An REV is reinterpreted as one specificsub-volume of minimal size at a certain location that reproduces the relevant continuum properties of the full microstructure. It is therefore called a local REV (lREV) here. (2) Besides comparably cheap geometrical and statistical analyses, no further simulations are needed. The minimum size of the sub-volume is estimated using the simple statistical properties of the full microstructure. Then, the location of the REV is identified solely by evaluating the structural properties of all possible candidates in a very fast, efficient, and systematic manner using a penalty function. The feasibility and correct functioning of the workflow were successfully tested and validated by simulating diffusive transport, advection, and electrochemical properties for an lREV. It is shown that the lREVs identified using this workflow can be significantly smaller than typical REVs. This can lead to significant speed-ups for any pore-scale simulations. The workflow can be applied to any type of heterogeneous material, even though it is showcased here using a lithium-ion battery cathode.

Förderung

  • European Union’s Horizon 2020 Research and Innovation Programme within the project “DEFACTO”
  • Federal Ministry for Economic Affairs and Climate Action within the project “Structur.E”

Zitieren

APA

Kellers, B., Lautenschlaeger, M. P., Rigos, N., Weinmiller, J., Danner, T., & Latz, A. (2023). Systematic Workflow for Efficient Identification of Local Representative Elementary Volumes Demonstrated with Lithium-Ion Battery Cathode Microstructures. Batteries, 9(7), 390. https://doi.org/10.3390/batteries9070390

Vancouver

Kellers B, Lautenschlaeger MP, Rigos N, Weinmiller J, Danner T, Latz A. Systematic Workflow for Efficient Identification of Local Representative Elementary Volumes Demonstrated with Lithium-Ion Battery Cathode Microstructures. Batteries. 2023;9(7):390. doi:10.3390/batteries9070390

BibTeX
@article{Kellers2023,
  author = {Kellers, Benjamin and Lautenschlaeger, Martin P. and Rigos, Nireas and Weinmiller, Julius and Danner, Timo and Latz, Arnulf},
  title = {Systematic Workflow for Efficient Identification of Local Representative Elementary Volumes Demonstrated with Lithium-Ion Battery Cathode Microstructures},
  journal = {Batteries},
  year = {2023},
  volume = {9},
  number = {7},
  pages = {390},
  doi = {10.3390/batteries9070390}
}
Kostenlos starten →