In Situ Formation of Li-Ag Alloy Thin Film for Stabilized Ultra-Thin Lithium Metal Anodes
Batteries · 17.11.2026 · 12 (11) · 495
DOI: 10.3390/batteries12110495 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 17.11.2026. Verfasst von Hyunyoung Kim und 8 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT.
Abstract (Originalsprache)
Lithium (Li) metal anodes are fundamental to the development of next-generation high-energy-density batteries, yet their practical use is severely limited by uncontrolled dendrite growth and interfacial instability. This study proposes an effective strategy to stabilize the Li metal interface through the in situ formation of a Li-Ag alloy using a sequential thermal evaporation process. By depositing an Ag seed layer as a lithiophilic template prior to Li evaporation, the nucleation barrier is significantly reduced, facilitating more uniform and dense lithium deposition. The morphological evolution and pristine surface chemical states of the evaporated layers were investigated under air-free conditions to confirm the compositional integrity of the alloyed interface. Electrochemical evaluations in symmetric cells demonstrate that the Li-Ag alloy phase effectively regulates Li-ion flux, reducing the surface roughness by approximately 30% and leading to a markedly lower overpotential and more than a two-fold extension of cycle life compared to pure evaporated Li. These results indicate that precision-controlled vacuum deposition and in situ alloying are viable approaches for engineering high-performance interfaces, providing a robust foundation for more reliable and dendrite-suppressed lithium metal battery systems.
Förderung
- National Research Foundation of Korea
- Ministry of Science and ICT
Zitieren
APA
Kim, H., Lee, S., Ahn, C. W., Han, H., Choi, Y., Hong, S., Kim, S., Shin, H., & Cho, S. (2026). In Situ Formation of Li-Ag Alloy Thin Film for Stabilized Ultra-Thin Lithium Metal Anodes. Batteries, 12(11), 495. https://doi.org/10.3390/batteries12110495
Vancouver
Kim H, Lee S, Ahn CW, Han H, Choi Y, Hong S, et al. In Situ Formation of Li-Ag Alloy Thin Film for Stabilized Ultra-Thin Lithium Metal Anodes. Batteries. 2026;12(11):495. doi:10.3390/batteries12110495
BibTeX
@article{Kim2026,
author = {Kim, Hyunyoung and Lee, Saac and Ahn, Chi Won and Han, Hee and Choi, Youngwoo and Hong, Seungbum and Kim, Sung-Soo and Shin, Hyeyoung and Cho, Su-Ho},
title = {In Situ Formation of Li-Ag Alloy Thin Film for Stabilized Ultra-Thin Lithium Metal Anodes},
journal = {Batteries},
year = {2026},
volume = {12},
number = {11},
pages = {495},
doi = {10.3390/batteries12110495}
}
EUVIMED