Particle-Size Engineering of Graphite Anodes for Lithium-Ion Batteries: A Review of Fast-Charging Kinetics, SEI Formation, and Cycling Stability
Batteries · 16.11.2026 · 12 (11) · 493
DOI: 10.3390/batteries12110493 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 16.11.2026. Verfasst von Koorosh Nikgoftar und 6 weiteren Autor:innen. Die Arbeit nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Concordia University.
Abstract (Originalsprache)
Graphite remains the most widely used anode material for lithium-ion batteries because of its excellent reversibility, low electrochemical potential, high conductivity, and stability. Nevertheless, the relatively low mobility of lithium ions in graphite hinders the performance of cells operated at high rates. A feasible way to enhance electrochemical kinetics and achieve higher rate capabilities is to decrease graphite particle size, as it reduces diffusion path length, increases the number of intercalation sites, and lowers concentration polarization. These measures can help not only improve rate capability but also suppress lithium plating under fast-charge regimes. On the other hand, decreasing particle size increases specific surface area, the number of edges and defect sites on the surface, electrolyte reactivity, SEI formation, irreversible lithium losses, and interfacial resistance, thereby lowering initial Coulombic efficiency and cell cycling stability. This review examines the correlation among graphite particle size, morphology, crystallographic texture, specific surface area, lithium-ion transport, intercalation kinetics, fast-charging capability, and aging. Special attention is paid to the compromise between enhanced Li+ transport kinetics and additional side reactions caused by increased specific surface area. Particle shape and size distribution engineering, carbon coatings and surface treatments, and electrolytes/SEIs optimization are also considered.
Förderung
- Concordia University
Zitieren
APA
Nikgoftar, K., Laggoune, A., Ikhlef, C., Nagendra, K., Reddy, A. K. M. R., Rajpurohit, J., & Zaghib, K. (2026). Particle-Size Engineering of Graphite Anodes for Lithium-Ion Batteries: A Review of Fast-Charging Kinetics, SEI Formation, and Cycling Stability. Batteries, 12(11), 493. https://doi.org/10.3390/batteries12110493
Vancouver
Nikgoftar K, Laggoune A, Ikhlef C, Nagendra K, Reddy AKMR, Rajpurohit J, et al. Particle-Size Engineering of Graphite Anodes for Lithium-Ion Batteries: A Review of Fast-Charging Kinetics, SEI Formation, and Cycling Stability. Batteries. 2026;12(11):493. doi:10.3390/batteries12110493
BibTeX
@article{Nikgoftar2026,
author = {Nikgoftar, Koorosh and Laggoune, Abderrahim and Ikhlef, Chaker and Nagendra, Keerthan and Reddy, Anil Kumar Madikere Raghunatha and Rajpurohit, Jitendrasingh and Zaghib, Karim},
title = {Particle-Size Engineering of Graphite Anodes for Lithium-Ion Batteries: A Review of Fast-Charging Kinetics, SEI Formation, and Cycling Stability},
journal = {Batteries},
year = {2026},
volume = {12},
number = {11},
pages = {493},
doi = {10.3390/batteries12110493}
}
EUVIMED