Multistep Constant Voltage Charging for Peak-Current Control and Improved Fast Charging Stability in Layered Cathodes
Batteries · 04.11.2026 · 12 (11) · 463
DOI: 10.3390/batteries12110463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 04.11.2026. Verfasst von Prosper Aidoo und 7 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, Ministry of Education, Hanbat National University.
Abstract (Originalsprache)
The widespread adoption of electric vehicles demands lithium-ion batteries capable of fast charging, yet achieving this without compromising cycle stability remains a critical challenge. While constant voltage (CV) charging is inherently capable of delivering a large amount of capacity within a short period of time, the extremely high peak-current generated at the onset of charging has limited its use beyond a supplementary role in conventional constant current-constant voltage (CCCV) protocols. In this work, we systematically investigate multistep CV charging protocols, in which intermediate voltage steps are introduced before the final 4.3 V CV step, and evaluate their effect on peak-current suppression and long-term electrochemical performance in two representative NCM layered cathodes, LiNi0.5Co0.2Mn0.3O2 (NCM523) and LiNi0.8Co0.1Mn0.1O2 (NCM811). By increasing the number of CV steps from one to four, the peak-current is progressively reduced and redistributed across lower-voltage regions, without any loss in overall charge or discharge capacity. This controlled reduction in peak-current leads to improved Coulombic efficiency (CE) and better retention of charging time over extended cycling. XPS depth profiling of cycled NCM811 electrodes directly confirms that the one-step CV protocol forms a thicker cathode-electrolyte interphase layer compared to the four-step protocol, providing evidence that peak-current suppression mitigates parasitic surface reactions. Furthermore, the performance gap between the one-step and four-step protocols is more pronounced in NCM811 than in NCM523, reflecting the greater vulnerability of high-nickel cathodes to high-current-induced surface degradation. These findings establish the number of CV steps as a simple yet effective design parameter for balancing fast charging capability and interfacial stability in NCM cathodes.
Förderung
- Ministry of Science and ICT
- Ministry of Education
- Hanbat National University
Zitieren
APA
Aidoo, P., Choi, H., Park, G., Lee, S., Chung, C., Park, J., Kim, C., & Ku, K. (2026). Multistep Constant Voltage Charging for Peak-Current Control and Improved Fast Charging Stability in Layered Cathodes. Batteries, 12(11), 463. https://doi.org/10.3390/batteries12110463
Vancouver
Aidoo P, Choi H, Park G, Lee S, Chung C, Park J, et al. Multistep Constant Voltage Charging for Peak-Current Control and Improved Fast Charging Stability in Layered Cathodes. Batteries. 2026;12(11):463. doi:10.3390/batteries12110463
BibTeX
@article{Aidoo2026,
author = {Aidoo, Prosper and Choi, Hyejin and Park, Gyeongdo and Lee, Sangyeob and Chung, Choong-Heui and Park, Jehee and Kim, Chunjoong and Ku, Kyojin},
title = {Multistep Constant Voltage Charging for Peak-Current Control and Improved Fast Charging Stability in Layered Cathodes},
journal = {Batteries},
year = {2026},
volume = {12},
number = {11},
pages = {463},
doi = {10.3390/batteries12110463}
}
EUVIMED