Life-Cycle Powertrain Sizing of Diesel–Battery Hybrid Trains via Configuration-Specific Joint Optimization of Driving Strategy and Energy Management
Batteries · 02.11.2026 · 12 (11) · 453
DOI: 10.3390/batteries12110453 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 02.11.2026. Verfasst von Chi Zhang und 9 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Beijing Natural Science Foundation–Fengtai Innovation Joint Fund, Key Technologies of New Energy Hybrid Locomotive.
Abstract (Originalsprache)
Conventional powertrain sizing of diesel–battery hybrid trains evaluates candidate component sizes on a common prescribed driving cycle, although each design changes the fuel-efficient speed trajectory and power split. This study develops a configuration-specific bilevel framework in which every candidate diesel-generator–battery design is evaluated after jointly optimizing its driving strategy and energy management over the multi-station route. At the upper level, particle swarm optimization selects the diesel generator set (DGS) maximum output power and battery series and parallel cell numbers to minimize life-cycle cost, including acquisition, fuel, maintenance, and battery replacement costs. At the lower level, joint optimization of driving strategy and energy management is reformulated as a second-order cone program that minimizes fuel consumption under timetable, dynamics, power, and battery-energy constraints. Lithium titanate (LTO), lithium iron phosphate (LFP), and nickel manganese cobalt oxide (NMC) batteries are evaluated under identical route, timetable, and economic conditions. For the 320 km, 11-station case, the best-found designs pair 700, 1500, and 1900 kW DGSs with 316.0, 391.3, and 336.0 kWh batteries, respectively. The best-found LTO design achieves the lowest life-cycle cost, CNY 61.087 million, which is 7.66% and 9.26% lower than those of the best-found LFP and NMC designs. Compared with a sizing method using a fixed driving strategy, the proposed framework reduces life-cycle cost by 17.00–18.39% and changes the selected component sizes for all three chemistries. These results show that configuration-specific operation affects both the sizing decision and the economic comparison.
Förderung
- Beijing Natural Science Foundation–Fengtai Innovation Joint Fund
- Key Technologies of New Energy Hybrid Locomotive
Zitieren
APA
Zhang, C., Xian, X., Wu, J., Zheng, X., Jia, Z., Wu, L., Leng, M., Zhou, X., Fan, C., & Chen, J. (2026). Life-Cycle Powertrain Sizing of Diesel–Battery Hybrid Trains via Configuration-Specific Joint Optimization of Driving Strategy and Energy Management. Batteries, 12(11), 453. https://doi.org/10.3390/batteries12110453
Vancouver
Zhang C, Xian X, Wu J, Zheng X, Jia Z, Wu L, et al. Life-Cycle Powertrain Sizing of Diesel–Battery Hybrid Trains via Configuration-Specific Joint Optimization of Driving Strategy and Energy Management. Batteries. 2026;12(11):453. doi:10.3390/batteries12110453
BibTeX
@article{Zhang2026,
author = {Zhang, Chi and Xian, Xiaoyu and Wu, Jian and Zheng, Xinjie and Jia, Zhidong and Wu, Lei and Leng, Mingjun and Zhou, Xingzhen and Fan, Chenguang and Chen, Jiancheng},
title = {Life-Cycle Powertrain Sizing of Diesel–Battery Hybrid Trains via Configuration-Specific Joint Optimization of Driving Strategy and Energy Management},
journal = {Batteries},
year = {2026},
volume = {12},
number = {11},
pages = {453},
doi = {10.3390/batteries12110453}
}
EUVIMED