Numerical Investigation of a Compact Air-Cooled EV Battery Thermal Management System Using Circumferential Fins
Batteries · 13.08.2026 · 12 (8) · 304
DOI: 10.3390/batteries12080304 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 13.08.2026. Verfasst von Ahmed Saeed und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Battery thermal management systems (BTMSs) are essential for maintaining the performance, efficiency, durability, and safety of electric-vehicle battery packs. Although fin-enhanced air-cooled BTMSs offer a simple and leakage-free cooling solution, their practical implementation is often limited by increased weight, insufficient temperature uniformity, and restricted heat-dissipation capability under high thermal loads. This study numerically investigates a compact air-cooled BTMS for two types of cylindrical lithium-ion batteries using aluminum and polypropylene (PP-β) circumferential fins in inline and staggered cell arrangements. Unlike previous fin-based air-cooling investigations, the present study combines a compact 2 × 4 battery pack with transverse and longitudinal center-to-center cell pitches of 1.2D, a direct comparison between metallic and lightweight polymer fins, and an assessment of two 18650 battery types with different capacities, thermophysical properties, and heat-generation characteristics. A three-dimensional steady-state conjugate heat-transfer model was developed in ANSYS Fluent to evaluate the effects of fin number, fin material, cell arrangement, ambient temperature, and inlet airflow velocity under discharge rates ranging from 1 C to 4 C. The results reveal that increasing the number of fins consistently reduced the maximum cell temperature but increased the pressure drop. The inline configuration generally achieved a lower maximum temperature and higher Nusselt number (Nu), whereas the staggered arrangement maintained a substantially lower pressure drop. Relative to the corresponding finless configurations, the Nu increased by 64.4–71.2% for the inline arrangement and 86.4–98.1% for the staggered arrangement. Polypropylene fins provided thermal performance close to that of aluminum fins in terms of maximum temperature while reducing the total fin mass by approximately 44.8%; however, aluminum fins maintained better temperature uniformity. These findings quantify the trade-offs among thermal performance, pressure drop, compact cell spacing, and system weight, providing design guidance for compact fin-enhanced air-cooled BTMSs.
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Saeed, A., Alawi, A., Janaideh, M. A., Elbaz, A. M. R., & Sharqawy, M. H. (2026). Numerical Investigation of a Compact Air-Cooled EV Battery Thermal Management System Using Circumferential Fins. Batteries, 12(8), 304. https://doi.org/10.3390/batteries12080304
Vancouver
Saeed A, Alawi A, Janaideh MA, Elbaz AMR, Sharqawy MH. Numerical Investigation of a Compact Air-Cooled EV Battery Thermal Management System Using Circumferential Fins. Batteries. 2026;12(8):304. doi:10.3390/batteries12080304
BibTeX
@article{Saeed2026,
author = {Saeed, Ahmed and Alawi, Ali and Janaideh, Mohammad Al and Elbaz, Ahmed M. R. and Sharqawy, Mostafa H.},
title = {Numerical Investigation of a Compact Air-Cooled EV Battery Thermal Management System Using Circumferential Fins},
journal = {Batteries},
year = {2026},
volume = {12},
number = {8},
pages = {304},
doi = {10.3390/batteries12080304}
}
EUVIMED