Glycolic Acid-Induced Surface Reconstruction and In Situ Carbon Coating for High-Electrochemical-Performance Lithium-Rich Manganese-Based Cathodes
Batteries · 15.02.2026 · 12 (2) · 70
DOI: 10.3390/batteries12020070 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 15.02.2026. Verfasst von Xichen Yang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Henan Province.
Abstract (Originalsprache)
Lithium-rich manganese-based cathode materials (LRMs, Li1.2Mn0.54Ni0.13Co0.13O2) are promising prospects for subsequent-generation lithium-ion batteries owing to their elevated operating voltage, large specific capacity, and affordability. Nonetheless, their actual implementation is significantly impeded by irreversible lattice-oxygen redox reactions, surface structural disorder, and interfacial phase collapse, leading to low initial Coulombic efficiency (ICE), inadequate rate capability, and sluggish Li+ transport. Herein, we report a simple and mild glycolic acid-assisted surface-engineering strategy to enhance the electrochemical performance of LRM. Glycolic acid treatment induces controlled H+/Li+ ion exchange at the particle surface and anchors surface transition metals through the formation of transition metals (TM)–OH and TM–O–C=O bonds. Subsequent calcination constructs an in situ carbon layer-spinel-layered heterostructure, accompanied by the generation of coupled anionic and cationic vacancies. This reconstructed surface provides fast Li+ diffusion pathways and stabilized ion-transport channels, while the dual-vacancy configuration enhances lattice-oxygen reversibility and suppresses structural disorder. Consequently, the modified LRM delivers a high initial discharge capacity of 285.3 mAh⋅g−1 with an ICE of 89.9%, while maintaining 81% capacity retention after 100 cycles. Notably, it exhibits a significantly suppressed voltage decay of only 1.7 mV/cycle at 3C, markedly outperforming the pristine LRM. Density Functional Theory (DFT) calculations reveal that the surface-modified sample possesses enhanced electronic conductivity, as evidenced by the improved Density of States (DOS), and achieves superior structural stability through increased binding energies. This environmentally benign surface-engineering strategy offers a practical and efficient route toward the industrial application of LRM.
Förderung
- Natural Science Foundation of Henan Province
Zitieren
APA
Yang, X., Miao, J., Chen, Y., Fang, Y., Wang, H., & Peng, G. (2026). Glycolic Acid-Induced Surface Reconstruction and In Situ Carbon Coating for High-Electrochemical-Performance Lithium-Rich Manganese-Based Cathodes. Batteries, 12(2), 70. https://doi.org/10.3390/batteries12020070
Vancouver
Yang X, Miao J, Chen Y, Fang Y, Wang H, Peng G. Glycolic Acid-Induced Surface Reconstruction and In Situ Carbon Coating for High-Electrochemical-Performance Lithium-Rich Manganese-Based Cathodes. Batteries. 2026;12(2):70. doi:10.3390/batteries12020070
BibTeX
@article{Yang2026,
author = {Yang, Xichen and Miao, Jie and Chen, Yongchao and Fang, Yaoxun and Wang, Hao and Peng, Gongchang},
title = {Glycolic Acid-Induced Surface Reconstruction and In Situ Carbon Coating for High-Electrochemical-Performance Lithium-Rich Manganese-Based Cathodes},
journal = {Batteries},
year = {2026},
volume = {12},
number = {2},
pages = {70},
doi = {10.3390/batteries12020070}
}
EUVIMED