Thermal System Simulation of Heating Strategies for 21700 Lithium-Ion Battery Modules Under Cold-Start Conditions
Batteries · 19.11.2025 · 11 (11) · 425
DOI: 10.3390/batteries11110425 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 19.11.2025. Verfasst von Grace Parra-Panchi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Departments of Chemical Engineering, Mechanical and Mechatronics Engineering at the University of Waterloo, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Rapid heating strategies are essential for the cold-start of lithium-ion batteries at subzero temperatures to avoid severe performance losses. This study explores different external and battery-powered heating strategies and evaluates the time required for 21700 lithium-ion battery modules to reach the minimum safe-operating temperature. Three heating strategies were simulated: battery discharge, external heating, and combined configurations at ambient temperatures of −20 to 0 °C with initial state of charges (SOCs) of 20–80%. Results show that with discharge-only heating, the module heated up slowly and was unable to completely discharge at −20 °C and 20% SOC. Yet when the external surface-heating strategy was applied, the module was heated up 75–86% faster to reach the safe-operating temperature, which allowed the module to discharge completely under all conditions. Furthermore, in a combined configuration strategy where the external surface-heating is applied while the module discharges, the module achieved an additional 7–21% faster temperature rise. Lastly, at −20 °C and 20% SOC, external heater energy exceeded the module’s usable output, while at 0 °C and moderate SOC, heater demand was only 2–3% of available battery capacity. Overall, findings show combining external heating discharge enables a reliable cold-start for the battery modules studied.
Förderung
- Departments of Chemical Engineering, Mechanical and Mechatronics Engineering at the University of Waterloo
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Parra-Panchi, G., Nasrollahzadeh, H., Wu, X., Fowler, M., & Rangom, Y. (2025). Thermal System Simulation of Heating Strategies for 21700 Lithium-Ion Battery Modules Under Cold-Start Conditions. Batteries, 11(11), 425. https://doi.org/10.3390/batteries11110425
Vancouver
Parra-Panchi G, Nasrollahzadeh H, Wu X, Fowler M, Rangom Y. Thermal System Simulation of Heating Strategies for 21700 Lithium-Ion Battery Modules Under Cold-Start Conditions. Batteries. 2025;11(11):425. doi:10.3390/batteries11110425
BibTeX
@article{ParraPanchi2025,
author = {Parra-Panchi, Grace and Nasrollahzadeh, Hanieh and Wu, Xiao-Yu and Fowler, Michael and Rangom, Yverick},
title = {Thermal System Simulation of Heating Strategies for 21700 Lithium-Ion Battery Modules Under Cold-Start Conditions},
journal = {Batteries},
year = {2025},
volume = {11},
number = {11},
pages = {425},
doi = {10.3390/batteries11110425}
}
EUVIMED