EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Facile Synthesis of S/Ti3C2Tx Mxene@Se Cathode for High-Sulfur-Loading Lithium–Sulfur Batteries

Yupu Shi, Jianbin Xu, Xian Du, Yi Zhang, Fan Zhao, Ziwei Tang, Le Kang, Huiling Du

Batteries · 03.12.2024 · 10 (12) · 430

DOI: 10.3390/batteries10120430 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 03.12.2024. Verfasst von Yupu Shi und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium–sulfur batteries (LSBs) are gaining much attention because they offer a much higher theoretical energy density compared to traditional lithium-ion batteries. However, the cycling performance of LSBs with high sulfur mass loading is poor due to the shuttle effect, limiting the practical application of LSBs. In this work, a unique porous sulfur/Ti3C2Tx Mxene@selenium (S/Ti3C2Tx@Se) cathode of a LSB is synthesized by a simple hydrothermal method to address these challenges. In this composite, Ti3C2Tx forms a conductive framework and Se is tightly anchored on the framework. The Se inhibits the agglomeration of Ti3C2Tx and prevents the collapse of Ti3C2Tx. The S/Ti3C2Tx@Se composite can adsorb lithium polysulfides (LiPSs) and suppresses the shuttle effect and volume changes during cycling, improving the cycling stability of LSBs with high S loading. A high capacity of 812.2 mAh g−1 at 0.1 C with 5.0 mg cm−2 sulfur mass loading after 100 cycles is obtained. This work could inspire further research into high-performance S host materials for high-S-loading LSBs.

Zitieren

APA

Shi, Y., Xu, J., Du, X., Zhang, Y., Zhao, F., Tang, Z., Kang, L., & Du, H. (2024). Facile Synthesis of S/Ti3C2Tx Mxene@Se Cathode for High-Sulfur-Loading Lithium–Sulfur Batteries. Batteries, 10(12), 430. https://doi.org/10.3390/batteries10120430

Vancouver

Shi Y, Xu J, Du X, Zhang Y, Zhao F, Tang Z, et al. Facile Synthesis of S/Ti3C2Tx Mxene@Se Cathode for High-Sulfur-Loading Lithium–Sulfur Batteries. Batteries. 2024;10(12):430. doi:10.3390/batteries10120430

BibTeX
@article{Shi2024,
  author = {Shi, Yupu and Xu, Jianbin and Du, Xian and Zhang, Yi and Zhao, Fan and Tang, Ziwei and Kang, Le and Du, Huiling},
  title = {Facile Synthesis of S/Ti3C2Tx Mxene@Se Cathode for High-Sulfur-Loading Lithium–Sulfur Batteries},
  journal = {Batteries},
  year = {2024},
  volume = {10},
  number = {12},
  pages = {430},
  doi = {10.3390/batteries10120430}
}
Kostenlos starten →