EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantifying the Aging of Lithium-Ion Pouch Cells Using Pressure Sensors

Yousof Nayfeh, Jon C. Vittitoe, Xianglin Li

Batteries · 21.09.2024 · 10 (9) · 333

DOI: 10.3390/batteries10090333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 21.09.2024. Verfasst von Yousof Nayfeh und 2 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, US ARMY DEVCOM GVSC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Understanding the behavior of pressure increases in lithium-ion (Li-ion) cells is essential for prolonging the lifespan of Li-ion battery cells and minimizing the safety risks associated with cell aging. This work investigates the effects of C-rates and temperature on pressure behavior in commercial lithium cobalt oxide (LCO)/graphite pouch cells. The battery is volumetrically constrained, and the mechanical pressure response is measured using a force gauge as the battery is cycled. The effect of the C-rate (1C, 2C, and 3C) and ambient temperature (10 °C, 25 °C, and 40 °C) on the increase in battery pressure is investigated. By analyzing the change in the minimum, maximum, and pressure difference per cycle, we identify and discuss the effects of different factors (i.e., SEI layer damage, electrolyte decomposition, lithium plating) on the pressure behavior. Operating at high C-rates or low temperatures rapidly increases the residual pressure as the battery is cycled. The results suggest that lithium plating is predominantly responsible for battery expansion and pressure increase during the cycle aging of Li-ion cells rather than electrolyte decomposition. Electrochemical impedance spectroscopy (EIS) measurements can support our conclusions. Postmortem analysis of the aged cells was performed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) to confirm the occurrence of lithium plating and film growth on the anodes of the aged cells. This study demonstrates that pressure measurements can provide insights into the aging mechanisms of Li-ion batteries and can be used as a reliable predictor of battery degradation.

Förderung

  • National Science Foundation
  • US ARMY DEVCOM GVSC

Zitieren

APA

Nayfeh, Y., Vittitoe, J. C., & Li, X. (2024). Quantifying the Aging of Lithium-Ion Pouch Cells Using Pressure Sensors. Batteries, 10(9), 333. https://doi.org/10.3390/batteries10090333

Vancouver

Nayfeh Y, Vittitoe JC, Li X. Quantifying the Aging of Lithium-Ion Pouch Cells Using Pressure Sensors. Batteries. 2024;10(9):333. doi:10.3390/batteries10090333

BibTeX
@article{Nayfeh2024,
  author = {Nayfeh, Yousof and Vittitoe, Jon C. and Li, Xianglin},
  title = {Quantifying the Aging of Lithium-Ion Pouch Cells Using Pressure Sensors},
  journal = {Batteries},
  year = {2024},
  volume = {10},
  number = {9},
  pages = {333},
  doi = {10.3390/batteries10090333}
}
Kostenlos starten →