EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Battery Lifecycle: Non-Destructive Separation of Batteries and Potential Second Life Applications

Gernot Schlögl, Stefan Grollitsch, Christian Ellersdorfer, Florian Feist, Christoph Kirschner, Josef Ecker, Franz Haas

Batteries · 05.08.2024 · 10 (8) · 280

DOI: 10.3390/batteries10080280 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 05.08.2024. Verfasst von Gernot Schlögl und 6 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency, ‘Circular Economy’ program through the project ‘BATTBOX: BATTeryrecycling Best Operations by X-processes for circular battery ecosystem’, Republic of Austria, Ministry of Climate Action.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large quantities of battery systems will be discarded from electric vehicles in the future. Non-destructive separation of used electric vehicle (EV) traction batteries enables a second life of battery components, extraction of high value secondary materials, and reduces the environmental footprint of recycling and separation processes. In this study, the key performance indicators (KPIs) for the second life application of spent EV batteries are identified. Three battery packs are analyzed in terms of the joining techniques used—and possible separation techniques—considering only direct recycling methods. The components that can be recovered from these batteries are evaluated against the KPIs. This study shows that all the batteries analyzed allow a second life in stationary and semi-stationary electrical storage systems and marine applications when used at the pack and module levels. Two packs can be reused in electric vehicles such as forklifts. However, the feasibility of re-use in micro-mobility and consumer electronics is very limited. This study shows that technically feasible separation methods are dictated and constrained by the joining techniques used. As welding and adhesive bonding pose challenges to separation processes, future efforts should prioritize ‘design for disassembly’ to ensure sustainable battery life cycle management.

Förderung

  • Austrian Research Promotion Agency
  • ‘Circular Economy’ program through the project ‘BATTBOX: BATTeryrecycling Best Operations by X-processes for circular battery ecosystem’
  • Republic of Austria, Ministry of Climate Action
  • TU Graz Open Access Publishing Fund

Zitieren

APA

Schlögl, G., Grollitsch, S., Ellersdorfer, C., Feist, F., Kirschner, C., Ecker, J., & Haas, F. (2024). Sustainable Battery Lifecycle: Non-Destructive Separation of Batteries and Potential Second Life Applications. Batteries, 10(8), 280. https://doi.org/10.3390/batteries10080280

Vancouver

Schlögl G, Grollitsch S, Ellersdorfer C, Feist F, Kirschner C, Ecker J, et al. Sustainable Battery Lifecycle: Non-Destructive Separation of Batteries and Potential Second Life Applications. Batteries. 2024;10(8):280. doi:10.3390/batteries10080280

BibTeX
@article{Schlgl2024,
  author = {Schlögl, Gernot and Grollitsch, Stefan and Ellersdorfer, Christian and Feist, Florian and Kirschner, Christoph and Ecker, Josef and Haas, Franz},
  title = {Sustainable Battery Lifecycle: Non-Destructive Separation of Batteries and Potential Second Life Applications},
  journal = {Batteries},
  year = {2024},
  volume = {10},
  number = {8},
  pages = {280},
  doi = {10.3390/batteries10080280}
}
Kostenlos starten →