EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hierarchically Porous Vanadium-Based Cathode Materials for High-Performance Na-Ion Batteries

Kanakaraj Aruchamy, Subramaniyan Ramasundaram, Athinarayanan Balasankar, Sivasubramani Divya, Ling Fei, Tae Hwan Oh

Batteries · 24.06.2024 · 10 (7) · 223

DOI: 10.3390/batteries10070223 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 24.06.2024. Verfasst von Kanakaraj Aruchamy und 5 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea grant funded by the Korean Government (MSIT), Korea Basic Science Institute (National research Facilities and Equipment Center) grant funded by the Ministry of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) in sectors requiring extensive energy storage. The abundant availability of sodium at a low cost addresses concerns associated with lithium, such as environmental contamination and limited availability. However, SIBs exhibit lower energy density and cyclic stability compared to LIBs. One of the key challenges in improving the performance of SIBs lies in the electrochemical properties of the cathode materials. Among the various cathodes utilized in SIBs, sodium vanadium phosphates (NVPs) and sodium vanadium fluorophosphates (NVPFs) are particularly advantageous. These vanadium-based cathodes offer high theoretical capacity and are cost-effective. Commercialization of SIBs with NVPF cathodes has already begun. However, the poor conductivity of these cathode materials leads to a short cycle life and inferior rate performance. Various synthesis methods have been explored to enhance the conductivity, including heteroatom doping (N, S, and Co), surface modification, the fabrication of porous nanostructures, and composite formation with conductive carbon materials. In particular, cathodes with interconnected hierarchical micro- and nano-porous morphologies have shown promise. This review focuses on the diverse synthesis methods reported for preparing hierarchically porous cathodes. With increased attention, particular emphasis has been placed on carbon composites of NVPs and NVPFs. Additionally, the synthesis of vanadium pentoxide-based cathodes is also discussed.

Förderung

  • National Research Foundation of Korea grant funded by the Korean Government (MSIT)
  • Korea Basic Science Institute (National research Facilities and Equipment Center) grant funded by the Ministry of Education

Zitieren

APA

Aruchamy, K., Ramasundaram, S., Balasankar, A., Divya, S., Fei, L., & Oh, T. H. (2024). Hierarchically Porous Vanadium-Based Cathode Materials for High-Performance Na-Ion Batteries. Batteries, 10(7), 223. https://doi.org/10.3390/batteries10070223

Vancouver

Aruchamy K, Ramasundaram S, Balasankar A, Divya S, Fei L, Oh TH. Hierarchically Porous Vanadium-Based Cathode Materials for High-Performance Na-Ion Batteries. Batteries. 2024;10(7):223. doi:10.3390/batteries10070223

BibTeX
@article{Aruchamy2024,
  author = {Aruchamy, Kanakaraj and Ramasundaram, Subramaniyan and Balasankar, Athinarayanan and Divya, Sivasubramani and Fei, Ling and Oh, Tae Hwan},
  title = {Hierarchically Porous Vanadium-Based Cathode Materials for High-Performance Na-Ion Batteries},
  journal = {Batteries},
  year = {2024},
  volume = {10},
  number = {7},
  pages = {223},
  doi = {10.3390/batteries10070223}
}
Kostenlos starten →