Research and Development of Vibration Diagnostics Methods for Electric Motors Using Machine Learning
Automation · 16.11.2026 · 7 (6) · 190
DOI: 10.3390/automation7060190 ↗Kurz gefasst
Fachartikel in der Zeitschrift Automation, online erschienen am 16.11.2026. Verfasst von Yuriy Kozhubaev und 4 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electric motors are the principal power units of industry, and their failures cause cascading stoppages of process equipment. The vibration signal carries the most complete information about the condition of rotating assemblies, yet machine-learning diagnostics is constrained by the shortage of labelled fault data. This work proposes and verifies a methodology for generating a physically grounded synthetic dataset of vibration signals: analytical models of imbalance, misalignment, rolling-bearing defects (BPFO, BPFI, BSF, FTF) and mechanical looseness produced 8000 one-second fragments of vibration acceleration covering eight classes of technical state, with variation of the rotational frequency (±5%), signal-to-noise ratio (5–30 dB) and defect amplitude. The synthetic signals were verified against reference Case Western Reserve University (CWRU) records: the outer- and inner-ring defect frequencies agree within 0.22%, and the envelope spectra are class-specific for these defects. Six classifiers were compared in three stages: Random Forest, XGBoost, a 1D-CNN (WDCNN), two 2D-CNNs on STFT and CWT representations, and a PatchTST transformer. Under the full set of variations, models reached a Macro F1 of 99.6–99.8%. On the real CWRU records, separate models were trained on the dataset based on real data from other operating loads. On the unseen loads, the Random Forest reached a Macro F1 of 95.5% and the 1D-CNN 93.2%, against 21–42% for the same models trained on synthetic data alone, and with one real fragment per class, the difference between the two training datasets was already 17–32 p.p. High accuracy on synthetic data therefore did not carry over to zero-shot diagnosis on the real bench.
Zitieren
APA
Kozhubaev, Y., Kazanin, D., Dorovskikh, R., Dolgiy, P., & Molodtsov, G. (2026). Research and Development of Vibration Diagnostics Methods for Electric Motors Using Machine Learning. Automation, 7(6), 190. https://doi.org/10.3390/automation7060190
Vancouver
Kozhubaev Y, Kazanin D, Dorovskikh R, Dolgiy P, Molodtsov G. Research and Development of Vibration Diagnostics Methods for Electric Motors Using Machine Learning. Automation. 2026;7(6):190. doi:10.3390/automation7060190
BibTeX
@article{Kozhubaev2026,
author = {Kozhubaev, Yuriy and Kazanin, Dmitry and Dorovskikh, Roman and Dolgiy, Pavel and Molodtsov, Georgy},
title = {Research and Development of Vibration Diagnostics Methods for Electric Motors Using Machine Learning},
journal = {Automation},
year = {2026},
volume = {7},
number = {6},
pages = {190},
doi = {10.3390/automation7060190}
}
EUVIMED