EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable and Intelligent Automation Framework for Aerospace Alloys Using Multi-Agent Deep Reinforcement Learning

Nagadeepan Anbazhagan, Senthilkumar Vagheesan, K. K. Ilavenil

Automation · 24.07.2026 · 7 (4) · 115

DOI: 10.3390/automation7040115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Automation, online erschienen am 24.07.2026. Verfasst von Nagadeepan Anbazhagan und 2 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advanced aerospace alloys such as titanium alloy (Ti-6Al-4V) are widely employed in critical applications owing to their excellent strength-to-weight ratio and corrosion resistance. However, machining these alloys remains challenging due to significant tool wear, poor material removal rates, and surface integrity concerns. This research offers a sustainable and intelligent machining framework for a 3 mm thick Ti-6Al-4V alloy, utilizing coated wire electrical discharge machining (WEDM) linked with Multi-Agent Deep Reinforcement Learning (MADRL). A Box–Behnken experimental design was adopted to gather baseline data for pulse-on time, pulse-off time, servo voltage, and peak current. The MADRL architecture combines cooperative agents to improve MRR, surface roughness, and kerf width concurrently. Beyond performance increase, the sustainability parameters of energy consumption, dielectric fluid use, and wire consumption were also studied. The proposed MADRL significantly improved the material removal rate (MRR) from 1.00 to 1.28 mm3/min and reduced the average surface roughness (Ra) from 1.95 to 1.66 µm, the kerf width from 0.27 to 0.24 mm, and the energy consumption from 122 to 107 J. The results show the potential of the proposed framework for adaptive, sustainable, and high-performance aerospace manufacturing.

Zitieren

APA

Anbazhagan, N., Vagheesan, S., & Ilavenil, K. K. (2026). Sustainable and Intelligent Automation Framework for Aerospace Alloys Using Multi-Agent Deep Reinforcement Learning. Automation, 7(4), 115. https://doi.org/10.3390/automation7040115

Vancouver

Anbazhagan N, Vagheesan S, Ilavenil KK. Sustainable and Intelligent Automation Framework for Aerospace Alloys Using Multi-Agent Deep Reinforcement Learning. Automation. 2026;7(4):115. doi:10.3390/automation7040115

BibTeX
@article{Anbazhagan2026,
  author = {Anbazhagan, Nagadeepan and Vagheesan, Senthilkumar and Ilavenil, K. K.},
  title = {Sustainable and Intelligent Automation Framework for Aerospace Alloys Using Multi-Agent Deep Reinforcement Learning},
  journal = {Automation},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {115},
  doi = {10.3390/automation7040115}
}
Kostenlos starten →