EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design Analysis and Performance Optimization of Next-Generation Hyperloop Pod Systems

Infanta Mary Priya, Prabhu Sethuramalingam, Hruday Divakaran, Dennis Abraham, Archit Srivastava, Ayush K. Choudhary, Allen Mathews, Amish Roopesh, Sidhant Sairam Mohan, Naman Vedh K. Sathyan

Automation · 11.03.2026 · 7 (2) · 47

DOI: 10.3390/automation7020047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Automation, online erschienen am 11.03.2026. Verfasst von Infanta Mary Priya und 9 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SRM Institute of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hyperloop transportation system is a promising ultra-high-speed mobility solution operating in a reduced-pressure environment, where pod performance is governed by the coupled behaviour of structural integrity, aerodynamics, and electromagnetic propulsion. This paper presents the design, numerical analysis, and performance evaluation of a lightweight hyperloop pod equipped with a linear induction motor (LIM)-based propulsion and electromagnetic stabilisation system. The pod chassis was fabricated using Carbon Fibre-Reinforced Polymer (CFRP) and Aluminium 6061-T6, achieving a significant weight reduction while maintaining structural safety. Finite Element Analysis reveals a maximum von Mises stress of 82 MPa, which is well below the material yield strength, and a maximum deformation of 0.64 mm under worst-case loading conditions. Modal analysis indicates the first natural frequency at 47.6 Hz, ensuring sufficient separation from operational excitation frequencies. Computational Fluid Dynamics analysis conducted inside a rectangular tube shows a drag coefficient reduction of approximately 18% compared to a baseline blunt design, with stable velocity distribution and no flow choking at operating speeds. The optimised nose geometry enables rapid acceleration, achieving 25 km/h within 1.1 s in prototype testing. The LIM analysis demonstrates a peak thrust of 1.85 kN at an optimal slip range of 6–8%, with operating currents between 35 and 55A and power consumption of 18–25 kW. Thermal analysis confirms a maximum stator temperature of 78 °C, remaining within safe operating limits. The integrated numerical and experimental results confirm the feasibility, efficiency, and stability of the proposed hyperloop pod design.

Förderung

  • SRM Institute of Science and Technology

Zitieren

APA

Priya, I. M., Sethuramalingam, P., Divakaran, H., Abraham, D., Srivastava, A., Choudhary, A. K., Mathews, A., Roopesh, A., Mohan, S. S., & Sathyan, N. V. K. (2026). Design Analysis and Performance Optimization of Next-Generation Hyperloop Pod Systems. Automation, 7(2), 47. https://doi.org/10.3390/automation7020047

Vancouver

Priya IM, Sethuramalingam P, Divakaran H, Abraham D, Srivastava A, Choudhary AK, et al. Design Analysis and Performance Optimization of Next-Generation Hyperloop Pod Systems. Automation. 2026;7(2):47. doi:10.3390/automation7020047

BibTeX
@article{Priya2026,
  author = {Priya, Infanta Mary and Sethuramalingam, Prabhu and Divakaran, Hruday and Abraham, Dennis and Srivastava, Archit and Choudhary, Ayush K. and Mathews, Allen and Roopesh, Amish and Mohan, Sidhant Sairam and Sathyan, Naman Vedh K.},
  title = {Design Analysis and Performance Optimization of Next-Generation Hyperloop Pod Systems},
  journal = {Automation},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {47},
  doi = {10.3390/automation7020047}
}
Kostenlos starten →