Real-Flight-Path Tracking Control Design for Quadrotor UAVs: A Precision-Guided Approach
Automation · 12.12.2025 · 6 (4) · 93
DOI: 10.3390/automation6040093 ↗Kurz gefasst
Fachartikel in der Zeitschrift Automation, online erschienen am 12.12.2025. Verfasst von Moataz Aly und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United Arab Emirates University.
Abstract (Originalsprache)
This study presents the design and implementation of a real-time flight-path tracking control system for a quadrotor unmanned aerial vehicle (UAV) capable of accurately following a mobile ground target under dynamic and uncertain environmental conditions. The proposed framework integrates classical fixed-gain PID regulation executed on Pixhawk with its built-in adaptive mechanisms, namely autotuning, hover-throttle learning, and dynamic harmonic notch filtering, to enhance robustness under communication latency and disturbances. No machine learning PID tuning is used on Pixhawk; adaptive features are estimator based rather than ML based. The proposed system addresses critical challenges in trajectory tracking, including real-time delay compensation between the UAV and rover, external perturbations, and the requirement to maintain stable six-degree-of-freedom (DOF) control of altitude, yaw, pitch, and roll. A dynamic mathematical model, formulated using ordinary differential equations with embedded delay elements, is developed to emulate real-world flight behavior and validate control performance. Experimental evaluation demonstrates robust path-tracking accuracy, attitude stability, and responsiveness across diverse terrains and weather conditions, achieving a mean positional error below one meter and effective resilience against an 8.2 ms communication delay. Overall, this work establishes a scalable, computationally efficient, and high-precision control framework for UAV guidance and cooperative ground-target tracking, with potential applications in autonomous navigation, search-and-rescue operations, infrastructure inspection, and intelligent surveillance. The term “delay-aware” in this work refers to the explicit modeling of the measured 8.2 ms end-to-end delay and the use of Pixhawk’s estimator-based adaptive mechanisms, without any machine learning-based PID tuning.
Förderung
- United Arab Emirates University
Zitieren
APA
Aly, M., Ali, B., Mekonnen, F. Y., Elhesasy, M., Wang, M., Kamra, M. M., & Dief, T. N. (2025). Real-Flight-Path Tracking Control Design for Quadrotor UAVs: A Precision-Guided Approach. Automation, 6(4), 93. https://doi.org/10.3390/automation6040093
Vancouver
Aly M, Ali B, Mekonnen FY, Elhesasy M, Wang M, Kamra MM, et al. Real-Flight-Path Tracking Control Design for Quadrotor UAVs: A Precision-Guided Approach. Automation. 2025;6(4):93. doi:10.3390/automation6040093
BibTeX
@article{Aly2025,
author = {Aly, Moataz and Ali, Badar and Mekonnen, Fitsum Y. and Elhesasy, Mohamed and Wang, Mingkai and Kamra, Mohamed M. and Dief, Tarek N.},
title = {Real-Flight-Path Tracking Control Design for Quadrotor UAVs: A Precision-Guided Approach},
journal = {Automation},
year = {2025},
volume = {6},
number = {4},
pages = {93},
doi = {10.3390/automation6040093}
}
EUVIMED