Evaluation of the Conversion Efficiency of Catalytic Convertors for Stoichiometric and Lean-Burn Methanol Engines
Atmosphere · 31.07.2026 · 17 (8) · 751
DOI: 10.3390/atmos17080751 ↗Kurz gefasst
Fachartikel in der Zeitschrift Atmosphere, online erschienen am 31.07.2026. Verfasst von Laihua Shi und 7 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Heavy-duty methanol engines are regarded as a promising low-carbon solution for commercial vehicle decarbonization, yet the comprehensive coupled characteristics of fuel consumption, multi-dimensional exhaust emissions, and the corresponding aftertreatment adaptability between stoichiometric and lean-burn technical routes remain insufficiently quantified, restricting the optimized application of methanol powertrains for China-VI emission compliance. To address this research gap, this study systematically investigates two China-VI compliant heavy-duty methanol engines with stoichiometric and lean-burn combustion strategies under cold-start and hot-start Worldwide Harmonized Transient Cycle. And a comparative analysis is conducted to clarify the differences in the fuel consumption, raw exhaust emission (including regulated pollutants, particulate matters, greenhouse gases, and unregulated pollutants), and the catalytic performance of aftertreatment systems between two engines with stoichiometric and lean-burn strategy. Results demonstrate that the lean-burn strategy achieves a 6% reduction in methanol fuel consumption compared with stoichiometric combustion, delivering superior fuel economy. In terms of regulated gaseous pollutants, both combustion strategies satisfy China-VI emission limits for CO and NO, while lean-burn combustion effectively lowers raw CO and NO emissions and reduces the purification pressure of aftertreatment systems. Non-methane Hydrocarbon emission under cold-start condition is identified as the primary compliance challenge, requiring a minimum aftertreatment conversion efficiency of 95%. Although lean-burn increases raw exhaust NMHC emission under hot-start condition, the post-catalyst emission could still meet the regulation limits. For particulate pollutants, lean-burn strategy realizes substantial reductions in both PM and PN emissions, which can meet emission standards without the corresponding aftertreatment system. In contrast, the stoichiometric combustion faces a risk of PN emission exceeding the regulation limit under cold-start conditions even with aftertreatment system. Additionally, lean-burn strategy optimizes greenhouse gas emission performance by cutting CO and CH4 emissions. Regarding unregulated pollutants, lean-burn strategy increases raw exhaust unburned methanol and formaldehyde emissions, particularly under cold-start condition, but significantly inhibits NH3 emission. This study quantitatively clarifies the performance trade-offs and adaptation advantages of lean-burn and stoichiometric strategy for heavy-duty methanol engines, providing fundamental data support and technical guidance for the low-carbon and low-pollution optimization of heavy-duty methanol vehicles.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Shi, L., Wang, C., Kang, J., Li, L., Xu, X., Wu, D., Liu, B., & Wang, X. (2026). Evaluation of the Conversion Efficiency of Catalytic Convertors for Stoichiometric and Lean-Burn Methanol Engines. Atmosphere, 17(8), 751. https://doi.org/10.3390/atmos17080751
Vancouver
Shi L, Wang C, Kang J, Li L, Xu X, Wu D, et al. Evaluation of the Conversion Efficiency of Catalytic Convertors for Stoichiometric and Lean-Burn Methanol Engines. Atmosphere. 2026;17(8):751. doi:10.3390/atmos17080751
BibTeX
@article{Shi2026,
author = {Shi, Laihua and Wang, Chongyao and Kang, Jianjian and Li, Lan and Xu, Xiaoliu and Wu, Di and Liu, Bing and Wang, Xin},
title = {Evaluation of the Conversion Efficiency of Catalytic Convertors for Stoichiometric and Lean-Burn Methanol Engines},
journal = {Atmosphere},
year = {2026},
volume = {17},
number = {8},
pages = {751},
doi = {10.3390/atmos17080751}
}
EUVIMED