EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A New Time-Based Real Driving Emission (RDE) Evaluation Method for Heavy-Duty Vehicles Focused on NOx Emissions Using Remote Monitoring Data

Shuojin Ren, Gang Li, Fengbin Wang, Xianglin Zhong, Jianfu Zhao, Hao Zhang, Dongzhi Gao, Quanshun Yu

Atmosphere · 11.05.2026 · 17 (5) · 487

DOI: 10.3390/atmos17050487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Atmosphere, online erschienen am 11.05.2026. Verfasst von Shuojin Ren und 7 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of the People’s Republic of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The real driving emission (RDE) test is going to be a necessary and effective evaluation method in the next-stage heavy-duty vehicle (HDV) emission standards, the rulemaking of which is under way worldwide (e.g., EPA 2027, Euro 7 and China 7). In this work, a time-based method (TBM) was proposed for future HDV RDE calculation. In TBM, cold-start and hot-run emissions are evaluated separately with moving average windows, yet no type-approval test results are needed so that it can also be used as a remote monitoring algorithm. This study analyzes the emissions of NOx. The value of 0.1 times maximum engine power is utilized to determine the cold-start window, while a 2-bin window structure is adopted for hot-run analysis. In order to further illustrate and validate this method, 16,629.4 h of remote monitoring data with a sampling rate of 1 Hz from 36 China 6 HDVs and 4 different months were analyzed for driving and NOx emission characteristics with TBM. The average duration of the 21,466 trips analyzed in this work was found to be 0.68 h, and the average ratio of trip work to WHTC (world harmonized transient driving cycle) work was around 1.38, indicating that lower duration and work requirements are needed in future RDE test. Moreover, the average cold-start length was approximately 912.4 s (15.2 min), and long cold starts could be found in cases with low ambient temperatures, low driving speeds and frequent stops. As for hot-run analysis, the proportion of Bin 1 (low-load windows) and Bin 2 (high-load windows) is directly related to the driving scenarios. The calculation results of TBM are comparable to the 2-bin method in EPA 2027. In addition, the optimization of NOx emissions under cold start and idle conditions are challenging for future HDV updates.

Förderung

  • Ministry of Science and Technology of the People’s Republic of China

Zitieren

APA

Ren, S., Li, G., Wang, F., Zhong, X., Zhao, J., Zhang, H., Gao, D., & Yu, Q. (2026). A New Time-Based Real Driving Emission (RDE) Evaluation Method for Heavy-Duty Vehicles Focused on NOx Emissions Using Remote Monitoring Data. Atmosphere, 17(5), 487. https://doi.org/10.3390/atmos17050487

Vancouver

Ren S, Li G, Wang F, Zhong X, Zhao J, Zhang H, et al. A New Time-Based Real Driving Emission (RDE) Evaluation Method for Heavy-Duty Vehicles Focused on NOx Emissions Using Remote Monitoring Data. Atmosphere. 2026;17(5):487. doi:10.3390/atmos17050487

BibTeX
@article{Ren2026,
  author = {Ren, Shuojin and Li, Gang and Wang, Fengbin and Zhong, Xianglin and Zhao, Jianfu and Zhang, Hao and Gao, Dongzhi and Yu, Quanshun},
  title = {A New Time-Based Real Driving Emission (RDE) Evaluation Method for Heavy-Duty Vehicles Focused on NOx Emissions Using Remote Monitoring Data},
  journal = {Atmosphere},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {487},
  doi = {10.3390/atmos17050487}
}
Kostenlos starten →