EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic-Assisted Machining of Tungsten Carbide for Improved Machining Quality and Efficiency

Chung-Kun Yen, Wan-Ling Hu, Xin-Yi Lin, Shun-Kai Chan

Applied System Innovation · 17.11.2026 · 9 (11) · 244

DOI: 10.3390/asi9110244 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied System Innovation, online erschienen am 17.11.2026. Verfasst von Chung-Kun Yen und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council (NSTC), Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precision machining of tungsten carbide (WC) presents challenges in surface quality, dimensional accuracy, and processing efficiency. This study developed an integrated computer numerical control (CNC) machining workflow combining ultrasonic-assisted machining (USM), stage-specific parameter allocation, and localized helical finishing. Conventional machining and USM were compared using DR14C, followed by machining parameter adjustments and toolpath optimization. The selected workflow was subsequently applied to TR15C and KG5. Under identical baseline conditions, USM reduced surface roughness from Ra 0.600 to 0.510 μm on the flat surface and from 0.617 to 0.504 μm in the groove, representing reductions of 15.0% and 18.3%, respectively. Confocal measurements further revealed reductions in mean Ra from 0.255 to 0.133 μm and mean Rz from 2.208 to 1.560 μm. The optimized process reduced CNC controller-simulated machining time by 82.7%. Localized helical finishing achieved Ra values of 0.352 and 0.429 μm on the flat and groove surfaces, respectively. Scanning electron microscopy (SEM), backscattered electron (BSE) imaging, and energy-dispersive X-ray spectroscopy (EDS) provided supplementary surface and elemental characterization. These findings demonstrated the effectiveness of the integrated workflow in improving machining quality and controller-predicted efficiency.

Förderung

  • National Science and Technology Council (NSTC), Taiwan

Zitieren

APA

Yen, C., Hu, W., Lin, X., & Chan, S. (2026). Ultrasonic-Assisted Machining of Tungsten Carbide for Improved Machining Quality and Efficiency. Applied System Innovation, 9(11), 244. https://doi.org/10.3390/asi9110244

Vancouver

Yen C, Hu W, Lin X, Chan S. Ultrasonic-Assisted Machining of Tungsten Carbide for Improved Machining Quality and Efficiency. Applied System Innovation. 2026;9(11):244. doi:10.3390/asi9110244

BibTeX
@article{Yen2026,
  author = {Yen, Chung-Kun and Hu, Wan-Ling and Lin, Xin-Yi and Chan, Shun-Kai},
  title = {Ultrasonic-Assisted Machining of Tungsten Carbide for Improved Machining Quality and Efficiency},
  journal = {Applied System Innovation},
  year = {2026},
  volume = {9},
  number = {11},
  pages = {244},
  doi = {10.3390/asi9110244}
}
Kostenlos starten →