EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Image-to-CAD Reconstruction for the Digital Delivery of Power Equipment: Validation Across Four Insulator Types

Zhiwei Rao, Hao Luo

Applied System Innovation · 12.11.2026 · 9 (11) · 239

DOI: 10.3390/asi9110239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied System Innovation, online erschienen am 12.11.2026. Verfasst von Zhiwei Rao und 1 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital delivery of power equipment requires integrating design information and the physical geometry of individual manufactured units into a single computer-aided design (CAD) model. To address the time-consuming nature of unit-by-unit measurement and manual modelling, this paper proposes a method for reconstructing a parametric CAD assembly from multi-view images. SAM 2 extracts the main body of the product from each view, and TRELLIS.2 uses this data to generate a mesh with material attributes. After axis alignment, the program segments components, identifies materials, and extracts exposed contours, then obtains key dimensions through dimensional calibration. The image reconstruction results are used to construct the exposed geometry, while design drawings provide hidden features and assembly constraints. Validation results for 16 insulators across 4 categories show that the macro-average F1 scores for surface category classification and component segmentation were 0.924 and 0.923, respectively; among the 48 major components, 44 were correctly identified by material, yielding an accuracy rate of 91.7%. The average absolute percentage error for independent length parameters was 2.32%. All 16 CAD assembly models were successfully re-imported into SolidWorks and meshed in COMSOL, with 15 of them passing the comprehensive delivery inspection. When product family templates and material reference libraries were reused, the average processing time per sample, measured from the input of 8 valid view images, was 134.6 s. The output STEP assembly models are linked to parameter sources, material labels, and inspection statuses, forming digital delivery units ready for use in engineering software. The method is applicable to similar equipment with approximately axisymmetric geometry, dimensional references, and corresponding design drawings.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Rao, Z., & Luo, H. (2026). Image-to-CAD Reconstruction for the Digital Delivery of Power Equipment: Validation Across Four Insulator Types. Applied System Innovation, 9(11), 239. https://doi.org/10.3390/asi9110239

Vancouver

Rao Z, Luo H. Image-to-CAD Reconstruction for the Digital Delivery of Power Equipment: Validation Across Four Insulator Types. Applied System Innovation. 2026;9(11):239. doi:10.3390/asi9110239

BibTeX
@article{Rao2026,
  author = {Rao, Zhiwei and Luo, Hao},
  title = {Image-to-CAD Reconstruction for the Digital Delivery of Power Equipment: Validation Across Four Insulator Types},
  journal = {Applied System Innovation},
  year = {2026},
  volume = {9},
  number = {11},
  pages = {239},
  doi = {10.3390/asi9110239}
}
Kostenlos starten →