Path and Speed Profile Generation for Computing Chassis Loads Required for Endurance Assessment
Applied Mechanics · 06.11.2026 · 7 (4) · 92
DOI: 10.3390/applmech7040092 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Mechanics, online erschienen am 06.11.2026. Verfasst von Markus Bergold und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Endurance of automobile parts is essential since failure of safety-relevant parts enforces very expensive recall campaigns and damages the reputation of the respective car manufacturer. Therefore, endurance assessment is an important sub-task within the design process, and extensive physical tests of components, parts and even the full vehicle are performed based on either simulated load data or measured loads during test drives on public roads. The latter, however, is only available after the existence of first prototypes, whereas the former would reduce development time of vehicles dramatically by shifting important conceptual decisions to the early digital development phase. During real tests on roads, the test driver would select speed and path, whereas for full-vehicle simulation these time functions need to be generated based on road data and vehicle performance data. In order to investigate the influence of vehicle control on endurance assessment, three idealized paths within the road borders are defined and generated: the lane center line, the rightmost lane along to the right lane border, and a time-optimal trajectory determined by solving a simplified optimal control problem. Speed specifications account for legal, curvature-related and vehicle-specific limits. These functions then serve as the basis of a full-vehicle simulation, where the car is represented by a multi-body system model including a driving controller to regulate the speed and follow the selected path like a real-world driver. The approach is validated by applications to a generic road section and a measured country road, where significant differences in the resulting longitudinal and lateral wheel loads can be observed by just modifying the path and the linked velocity profile. While lateral loads are comparable for different trajectories, longitudinal loads determined along the time-optimal path are 12% lower than those for the other two trajectories.
Zitieren
APA
Bergold, M., & Bestle, D. (2026). Path and Speed Profile Generation for Computing Chassis Loads Required for Endurance Assessment. Applied Mechanics, 7(4), 92. https://doi.org/10.3390/applmech7040092
Vancouver
Bergold M, Bestle D. Path and Speed Profile Generation for Computing Chassis Loads Required for Endurance Assessment. Applied Mechanics. 2026;7(4):92. doi:10.3390/applmech7040092
BibTeX
@article{Bergold2026,
author = {Bergold, Markus and Bestle, Dieter},
title = {Path and Speed Profile Generation for Computing Chassis Loads Required for Endurance Assessment},
journal = {Applied Mechanics},
year = {2026},
volume = {7},
number = {4},
pages = {92},
doi = {10.3390/applmech7040092}
}
EUVIMED