Development of a Process for Optimising the Number of Springs in Modular Elastic Gears of Rack Rail Pinion Systems for Vibration Data-Based Railway System Safety
Applied Mechanics · 31.07.2026 · 7 (3) · 62
DOI: 10.3390/applmech7030062 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Mechanics, online erschienen am 31.07.2026. Verfasst von Hyung Suk Mun und 1 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Land, Infrastructure and Transport.
Abstract (Originalsprache)
Rack railway systems operating on steep-gradient routes rely on rack-and-pinion propulsion mechanisms that generate substantial vibrational excitation through cyclic gear mesh contact, adversely affecting passenger comfort and long-term mechanical reliability. Conventional integrated steel gears transmit propulsive forces without inherent vibration attenuation, and a systematic design methodology for optimising the internal rubber spring configuration of elastic gears for such applications has not been established. This study develops a kinematic spring-mass model for both conventional steel and elastic rubber gear configurations in a Korean rack railway propulsion system and validates it through controlled experimental testing. A high-speed rail–wheel contact simulator was employed to measure vertical vibrational accelerations under rigid–rigid (steel–steel) and rigid–resilient (steel–rubber elastic gear) contact conditions, with a load simulating steep-gradient operational forces applied to the gear assembly. The elastic gear achieved a 25.1-fold reduction in vertical vibrational acceleration relative to the steel gear baseline (6.4 m/s2 vs. 160.7 m/s2). Time-domain statistics (mean, RMS, standard deviation and peak envelope) are reported for both configurations from repeated runs. Analysis of the normalised effective stiffness as a function of the number of rubber springs predicts that four springs represent a practical optimum, beyond which the incremental stiffness change falls below 0.5%; experimental validation of intermediate spring counts is identified as future work. A spring-number optimisation framework is proposed that returns both a spring count and a rubber compound specification, balancing vibration attenuation against load distribution, torque-transmission capacity and component fatigue life.
Förderung
- Ministry of Land, Infrastructure and Transport
Zitieren
APA
Mun, H. S., & Park, C. W. (2026). Development of a Process for Optimising the Number of Springs in Modular Elastic Gears of Rack Rail Pinion Systems for Vibration Data-Based Railway System Safety. Applied Mechanics, 7(3), 62. https://doi.org/10.3390/applmech7030062
Vancouver
Mun HS, Park CW. Development of a Process for Optimising the Number of Springs in Modular Elastic Gears of Rack Rail Pinion Systems for Vibration Data-Based Railway System Safety. Applied Mechanics. 2026;7(3):62. doi:10.3390/applmech7030062
BibTeX
@article{Mun2026,
author = {Mun, Hyung Suk and Park, Chan Woo},
title = {Development of a Process for Optimising the Number of Springs in Modular Elastic Gears of Rack Rail Pinion Systems for Vibration Data-Based Railway System Safety},
journal = {Applied Mechanics},
year = {2026},
volume = {7},
number = {3},
pages = {62},
doi = {10.3390/applmech7030062}
}
EUVIMED