EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel Design and Optimization of Aircraft Stiffened Panels for Improved Critical Buckling Load Resistance

Raed Hossain, Tanvir Ahmad, Mohammed Aksir Talukder, Md Mazedur Rahman, Gyula Varga, Saiaf Bin Rayhan

Applied Mechanics · 02.03.2026 · 7 (1) · 21

DOI: 10.3390/applmech7010021 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Mechanics, online erschienen am 02.03.2026. Verfasst von Raed Hossain und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes two novel stiffened panel configurations, designated X and X-30, manufactured from the conventional aerospace alloy Al 2024-T3 to enhance the critical buckling resistance under in-plane compression. Their performance was evaluated against traditional T-, I-, L-, and Omega-type stiffeners, as well as a newly introduced Y-panel found in the literature. Initial results show that both proposed designs achieve 80–200% higher buckling capacity than conventional panels, with only a 4.54% difference between the X and X-30 configurations. A weight-constrained optimization was then conducted using a Box–Behnken design of experiments combined with a multi-objective genetic algorithm in Ansys DesignXplorer. After correcting inconsistencies in the initial optimization ranges, the prediction error in the optimized buckling values was reduced to 4%. The optimized X panel attained the highest critical buckling load of 2920 kN, followed by the X-30 panel with 2744.3 kN, corresponding to a 114–258% improvement over traditional stiffener geometries. A Pearson correlation matrix further suggested that, for all the stiffened panels except Omega, the base plate showed a strong correlation with the critical buckling load, typically ranging from 0.83 to 0.99. In contrast, for the X-30 panel, the lower base part also showed a strong correlation of 0.93.

Zitieren

APA

Hossain, R., Ahmad, T., Talukder, M. A., Rahman, M. M., Varga, G., & Rayhan, S. B. (2026). Novel Design and Optimization of Aircraft Stiffened Panels for Improved Critical Buckling Load Resistance. Applied Mechanics, 7(1), 21. https://doi.org/10.3390/applmech7010021

Vancouver

Hossain R, Ahmad T, Talukder MA, Rahman MM, Varga G, Rayhan SB. Novel Design and Optimization of Aircraft Stiffened Panels for Improved Critical Buckling Load Resistance. Applied Mechanics. 2026;7(1):21. doi:10.3390/applmech7010021

BibTeX
@article{Hossain2026,
  author = {Hossain, Raed and Ahmad, Tanvir and Talukder, Mohammed Aksir and Rahman, Md Mazedur and Varga, Gyula and Rayhan, Saiaf Bin},
  title = {Novel Design and Optimization of Aircraft Stiffened Panels for Improved Critical Buckling Load Resistance},
  journal = {Applied Mechanics},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {21},
  doi = {10.3390/applmech7010021}
}
Kostenlos starten →